Hi Geert,
Thank you for the patch.
On Fri, May 21, 2021 at 09:54:06AM +0200, Geert Uytterhoeven wrote:
> The dt-schema for nxp,pcf8575 expects GPIO hogs node names to end with a
> 'hog' suffix.
>
> Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
> ---
> arch/arm/boot/dts/dra7-evm.dts | 2 +-
> arch/arm/boot/dts/dra71-evm.dts | 2 +-
> arch/arm/boot/dts/dra72-evm-common.dtsi | 2 +-
> arch/arm/boot/dts/dra76-evm.dts | 2 +-
> 4 files changed, 4 insertions(+), 4 deletions(-)
>
> diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts
> index 38530dbb89a00b7c..3dcb6e1f49bcf1f0 100644
> --- a/arch/arm/boot/dts/dra7-evm.dts
> +++ b/arch/arm/boot/dts/dra7-evm.dts
> @@ -366,7 +366,7 @@ pcf_hdmi: gpio@26 {
> reg = <0x26>;
> gpio-controller;
> #gpio-cells = <2>;
> - p1 {
> + hdmi-audio-hog {
> /* vin6_sel_s0: high: VIN6, low: audio */
> gpio-hog;
> gpios = <1 GPIO_ACTIVE_HIGH>;
> diff --git a/arch/arm/boot/dts/dra71-evm.dts b/arch/arm/boot/dts/dra71-evm.dts
> index 6d2cca6b44883e59..a64364443031525b 100644
> --- a/arch/arm/boot/dts/dra71-evm.dts
> +++ b/arch/arm/boot/dts/dra71-evm.dts
> @@ -187,7 +187,7 @@ &pcf_gpio_21 {
> };
>
> &pcf_hdmi {
> - p0 {
> + hdmi-i2c-disable-hog {
> /*
> * PM_OEn to High: Disable routing I2C3 to PM_I2C
> * With this PM_SEL(p3) should not matter
> diff --git a/arch/arm/boot/dts/dra72-evm-common.dtsi b/arch/arm/boot/dts/dra72-evm-common.dtsi
> index b65b2dd094d0ff57..f2384277d5dcdc5c 100644
> --- a/arch/arm/boot/dts/dra72-evm-common.dtsi
> +++ b/arch/arm/boot/dts/dra72-evm-common.dtsi
> @@ -268,7 +268,7 @@ pcf_hdmi: pcf8575@26 {
> */
> lines-initial-states = <0x0f2b>;
>
> - p1 {
> + hdmi-audio-hog {
> /* vin6_sel_s0: high: VIN6, low: audio */
> gpio-hog;
> gpios = <1 GPIO_ACTIVE_HIGH>;
> diff --git a/arch/arm/boot/dts/dra76-evm.dts b/arch/arm/boot/dts/dra76-evm.dts
> index 9bd01ae40b1d1fbb..df47ea59c9c404c2 100644
> --- a/arch/arm/boot/dts/dra76-evm.dts
> +++ b/arch/arm/boot/dts/dra76-evm.dts
> @@ -381,7 +381,7 @@ pcf_hdmi: pcf8575@26 {
> reg = <0x26>;
> gpio-controller;
> #gpio-cells = <2>;
> - p1 {
> + hdmi-audio-hog {
> /* vin6_sel_s0: high: VIN6, low: audio */
> gpio-hog;
> gpios = <1 GPIO_ACTIVE_HIGH>;
--
Regards,
Laurent Pinchart
