When we set bit 10 high we use continuous mode and not single
mode. Let's correct this to avoid confusion. No functional
changes here, the code does the right thing with bit 10.
Cc: Adam Ford <aford173@xxxxxxxxx>
Cc: Carl Philipp Klemm <philipp@xxxxxxxx>
Cc: Eduardo Valentin <edubezval@xxxxxxxxx>
Cc: H. Nikolaus Schaller <hns@xxxxxxxxxxxxx>
Cc: Merlijn Wajer <merlijn@xxxxxxxxxx>
Cc: Pavel Machek <pavel@xxxxxx>
Cc: Peter Ujfalusi <peter.ujfalusi@xxxxxxxxx>
Cc: Sebastian Reichel <sre@xxxxxxxxxx>
Signed-off-by: Tony Lindgren <tony@xxxxxxxxxxx>
---
drivers/thermal/ti-soc-thermal/omap4-thermal-data.c | 4 ++--
drivers/thermal/ti-soc-thermal/omap4xxx-bandgap.h | 4 ++--
2 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/thermal/ti-soc-thermal/omap4-thermal-data.c b/drivers/thermal/ti-soc-thermal/omap4-thermal-data.c
--- a/drivers/thermal/ti-soc-thermal/omap4-thermal-data.c
+++ b/drivers/thermal/ti-soc-thermal/omap4-thermal-data.c
@@ -24,7 +24,7 @@ omap4430_mpu_temp_sensor_registers = {
.bgap_dtemp_mask = OMAP4430_BGAP_TEMP_SENSOR_DTEMP_MASK,
.bgap_mode_ctrl = OMAP4430_TEMP_SENSOR_CTRL_OFFSET,
- .mode_ctrl_mask = OMAP4430_SINGLE_MODE_MASK,
+ .mode_ctrl_mask = OMAP4430_CONTINUOUS_MODE_MASK,
.bgap_efuse = OMAP4430_FUSE_OPP_BGAP,
};
@@ -97,7 +97,7 @@ omap4460_mpu_temp_sensor_registers = {
.mask_cold_mask = OMAP4460_MASK_COLD_MASK,
.bgap_mode_ctrl = OMAP4460_BGAP_CTRL_OFFSET,
- .mode_ctrl_mask = OMAP4460_SINGLE_MODE_MASK,
+ .mode_ctrl_mask = OMAP4460_CONTINUOUS_MODE_MASK,
.bgap_counter = OMAP4460_BGAP_COUNTER_OFFSET,
.counter_mask = OMAP4460_COUNTER_MASK,
diff --git a/drivers/thermal/ti-soc-thermal/omap4xxx-bandgap.h b/drivers/thermal/ti-soc-thermal/omap4xxx-bandgap.h
--- a/drivers/thermal/ti-soc-thermal/omap4xxx-bandgap.h
+++ b/drivers/thermal/ti-soc-thermal/omap4xxx-bandgap.h
@@ -40,7 +40,7 @@
/* OMAP4430.TEMP_SENSOR bits */
#define OMAP4430_BGAP_TEMPSOFF_MASK BIT(12)
#define OMAP4430_BGAP_TSHUT_MASK BIT(11)
-#define OMAP4430_SINGLE_MODE_MASK BIT(10)
+#define OMAP4430_CONTINUOUS_MODE_MASK BIT(10)
#define OMAP4430_BGAP_TEMP_SENSOR_SOC_MASK BIT(9)
#define OMAP4430_BGAP_TEMP_SENSOR_EOCZ_MASK BIT(8)
#define OMAP4430_BGAP_TEMP_SENSOR_DTEMP_MASK (0xff << 0)
@@ -113,7 +113,7 @@
#define OMAP4460_BGAP_TEMP_SENSOR_DTEMP_MASK (0x3ff << 0)
/* OMAP4460.BANDGAP_CTRL bits */
-#define OMAP4460_SINGLE_MODE_MASK BIT(31)
+#define OMAP4460_CONTINUOUS_MODE_MASK BIT(31)
#define OMAP4460_MASK_HOT_MASK BIT(1)
#define OMAP4460_MASK_COLD_MASK BIT(0)
--
2.30.0
