Hi
This series adds multi-port support in mac-only mode (multi MAC mode) to TI
AM65x CPSW driver in preparation for enabling support for multi-port devices,
like Main CPSW0 on K3 J721E SoC or future CPSW3g on K3 AM64x SoC.
The multi MAC mode is implemented by configuring every enabled port in "mac-only"
mode (all ingress packets are sent only to the Host port and egress packets
directed to target Ext. Port) and creating separate net_device for
every enabled Ext. port.
Patches 1-3: Preparation patches to improve K3 CPSW configuration depending on DT
Patches 4-5: Fix VLAN offload for multi MAC mode
Patch 6: Fixes CPTS context lose issue during PM runtime transition
Patches 7-8: add multi-port support to TI AM65x CPSW
Grygorii Strashko (8):
net: ethernet: ti: am65-cpsw: move ale selection in pdata
net: ethernet: ti: am65-cpsw: move free desc queue mode selection in pdata
net: ethernet: ti: am65-cpsw: use cppi5_desc_is_tdcm()
net: ethernet: ti: cpsw_ale: add cpsw_ale_vlan_del_modify()
net: ethernet: ti: am65-cpsw: fix vlan offload for multi mac mode
net: ethernet: ti: am65-cpsw: keep active if cpts enabled
net: ethernet: ti: am65-cpsw: prepare xmit/rx path for multi-port
devices in mac-only mode
net: ethernet: ti: am65-cpsw: add multi port support in mac-only mode
drivers/net/ethernet/ti/am65-cpsw-nuss.c | 179 ++++++++++++++---------
drivers/net/ethernet/ti/am65-cpsw-nuss.h | 4 +
drivers/net/ethernet/ti/cpsw_ale.c | 41 +++++-
drivers/net/ethernet/ti/cpsw_ale.h | 1 +
drivers/net/ethernet/ti/cpsw_switchdev.c | 2 +-
5 files changed, 153 insertions(+), 74 deletions(-)
--
2.17.1
