Hi All, The following is a v7 version of the series [1-6] that adds an IRQChip driver for the local interrupt controller present within a Programmable Real-Time Unit and Industrial Communication Subsystem (PRU-ICSS) present on a number of TI SoCs including OMAP architecture based AM335x, AM437x, AM57xx SoCs, Keystone 2 architecture based 66AK2G SoCs, Davinci architecture based OMAP-L138/DA850 SoCs and the latest K3 architecture based AM65x and J721E SoCs. Please see the v1 cover-letter [1] for details about the features of this interrupt controller. More details can be found in any of the supported SoC TRMs. Eg: Chapter 30.1.6 of AM5728 TRM [7] Please see the individual patches for exact changes in each patch, following are the main changes from v5: - Add Co-developed-by tags. - Change the irq type to IRQ_TYPE_LEVEL_HIGH in patch #2. [1] https://patchwork.kernel.org/cover/11034561/ [2] https://patchwork.kernel.org/cover/11069749/ [3] https://patchwork.kernel.org/cover/11639055/ [4] https://patchwork.kernel.org/cover/11688727/ [5] https://patchwork.kernel.org/cover/11746463/ [6] https://patchwork.kernel.org/cover/11776181/ [7] http://www.ti.com/lit/pdf/spruhz6 Best regards Grzegorz David Lechner (1): irqchip/irq-pruss-intc: Implement irq_{get,set}_irqchip_state ops Grzegorz Jaszczyk (1): irqchip/irq-pruss-intc: Add a PRUSS irqchip driver for PRUSS interrupts Suman Anna (3): dt-bindings: irqchip: Add PRU-ICSS interrupt controller bindings irqchip/irq-pruss-intc: Add logic for handling reserved interrupts irqchip/irq-pruss-intc: Add support for ICSSG INTC on K3 SoCs .../interrupt-controller/ti,pruss-intc.yaml | 158 +++++ drivers/irqchip/Kconfig | 10 + drivers/irqchip/Makefile | 1 + drivers/irqchip/irq-pruss-intc.c | 664 +++++++++++++++++++++ 4 files changed, 833 insertions(+) create mode 100644 Documentation/devicetree/bindings/interrupt-controller/ti,pruss-intc.yaml create mode 100644 drivers/irqchip/irq-pruss-intc.c -- 2.7.4
