The convention for node names is to use hyphens, not underscores.
dtschema for pca95xx requires GPIO hogs to end with 'hog' prefix.
Signed-off-by: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
---
arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts
index 4f801721564f..f1255f635dfd 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts
@@ -203,25 +203,25 @@
gpio-line-names = "PS_GTR_LAN_SEL0", "PS_GTR_LAN_SEL1", "PS_GTR_LAN_SEL2", "PS_GTR_LAN_SEL3",
"PCI_CLK_DIR_SEL", "IIC_MUX_RESET_B", "GEM3_EXP_RESET_B",
"", "", "", "", "", "", "", "", "";
- gtr-sel0 {
+ gtr-sel0-hog {
gpio-hog;
gpios = <0 0>;
output-low; /* PCIE = 0, DP = 1 */
line-name = "sel0";
};
- gtr-sel1 {
+ gtr-sel1-hog {
gpio-hog;
gpios = <1 0>;
output-high; /* PCIE = 0, DP = 1 */
line-name = "sel1";
};
- gtr-sel2 {
+ gtr-sel2-hog {
gpio-hog;
gpios = <2 0>;
output-high; /* PCIE = 0, USB0 = 1 */
line-name = "sel2";
};
- gtr-sel3 {
+ gtr-sel3-hog {
gpio-hog;
gpios = <3 0>;
output-high; /* PCIE = 0, SATA = 1 */
--
2.17.1
