Switch all TI DRA7x boards to use new cpsw switch driver. Those boards configured in dual_mac mode by default. Hence, dual_mac mode has been preserved the same way between legacy and new driver it's safe to switch drivers. Signed-off-by: Grygorii Strashko <grygorii.strashko@xxxxxx> --- arch/arm/boot/dts/dra7-evm.dts | 13 ++++++------- arch/arm/boot/dts/dra71-evm.dts | 14 +++++++------- arch/arm/boot/dts/dra72-evm-common.dtsi | 4 ---- arch/arm/boot/dts/dra72-evm-revc.dts | 14 +++++++------- arch/arm/boot/dts/dra72-evm.dts | 13 +++++++++---- arch/arm/boot/dts/dra76-evm.dts | 14 ++++++-------- 6 files changed, 35 insertions(+), 37 deletions(-) diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts index a952d934fcf2..051aac4e95b7 100644 --- a/arch/arm/boot/dts/dra7-evm.dts +++ b/arch/arm/boot/dts/dra7-evm.dts @@ -537,24 +537,23 @@ ti,no-idle-on-init; }; -&mac { +&mac_sw { status = "okay"; - dual_emac; }; -&cpsw_emac0 { +&cpsw_port1 { phy-handle = <ðphy0>; phy-mode = "rgmii"; - dual_emac_res_vlan = <1>; + ti,dual-emac-pvid = <1>; }; -&cpsw_emac1 { +&cpsw_port2 { phy-handle = <ðphy1>; phy-mode = "rgmii"; - dual_emac_res_vlan = <2>; + ti,dual-emac-pvid = <2>; }; -&davinci_mdio { +&davinci_mdio_sw { ethphy0: ethernet-phy@2 { reg = <2>; }; diff --git a/arch/arm/boot/dts/dra71-evm.dts b/arch/arm/boot/dts/dra71-evm.dts index 10da51bee42f..cad58f733bd6 100644 --- a/arch/arm/boot/dts/dra71-evm.dts +++ b/arch/arm/boot/dts/dra71-evm.dts @@ -219,26 +219,26 @@ vqmmc-supply = <&evm_1v8_sw>; }; -&mac { +&mac_sw { mode-gpios = <&pcf_gpio_21 4 GPIO_ACTIVE_LOW>, <&pcf_hdmi 9 GPIO_ACTIVE_LOW>, /* P11 */ <&pcf_hdmi 10 GPIO_ACTIVE_LOW>; /* P12 */ - dual_emac; + status = "okay"; }; -&cpsw_emac0 { +&cpsw_port1 { phy-handle = <&dp83867_0>; phy-mode = "rgmii-id"; - dual_emac_res_vlan = <1>; + ti,dual-emac-pvid = <1>; }; -&cpsw_emac1 { +&cpsw_port2 { phy-handle = <&dp83867_1>; phy-mode = "rgmii-id"; - dual_emac_res_vlan = <2>; + ti,dual-emac-pvid = <2>; }; -&davinci_mdio { +&davinci_mdio_sw { dp83867_0: ethernet-phy@2 { reg = <2>; ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>; diff --git a/arch/arm/boot/dts/dra72-evm-common.dtsi b/arch/arm/boot/dts/dra72-evm-common.dtsi index 9273a7d6fa29..8d0d960107fb 100644 --- a/arch/arm/boot/dts/dra72-evm-common.dtsi +++ b/arch/arm/boot/dts/dra72-evm-common.dtsi @@ -462,10 +462,6 @@ }; }; -&mac { - status = "okay"; -}; - &dcan1 { status = "ok"; pinctrl-names = "default", "sleep", "active"; diff --git a/arch/arm/boot/dts/dra72-evm-revc.dts b/arch/arm/boot/dts/dra72-evm-revc.dts index 54dab0f212d1..f242b937f88c 100644 --- a/arch/arm/boot/dts/dra72-evm-revc.dts +++ b/arch/arm/boot/dts/dra72-evm-revc.dts @@ -77,26 +77,26 @@ interrupts = <30 IRQ_TYPE_EDGE_FALLING>; }; -&mac { +&mac_sw { mode-gpios = <&pcf_gpio_21 4 GPIO_ACTIVE_LOW>, <&pcf_hdmi 9 GPIO_ACTIVE_LOW>, /* P11 */ <&pcf_hdmi 10 GPIO_ACTIVE_LOW>; /* P12 */ - dual_emac; + status = "okay"; }; -&cpsw_emac0 { +&cpsw_port1 { phy-handle = <&dp83867_0>; phy-mode = "rgmii-id"; - dual_emac_res_vlan = <1>; + ti,dual-emac-pvid = <1>; }; -&cpsw_emac1 { +&cpsw_port2 { phy-handle = <&dp83867_1>; phy-mode = "rgmii-id"; - dual_emac_res_vlan = <2>; + ti,dual-emac-pvid = <2>; }; -&davinci_mdio { +&davinci_mdio_sw { dp83867_0: ethernet-phy@2 { reg = <2>; ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>; diff --git a/arch/arm/boot/dts/dra72-evm.dts b/arch/arm/boot/dts/dra72-evm.dts index 6ea9936f7d9c..5f62f92eb96c 100644 --- a/arch/arm/boot/dts/dra72-evm.dts +++ b/arch/arm/boot/dts/dra72-evm.dts @@ -69,17 +69,22 @@ interrupts = <11 IRQ_TYPE_EDGE_FALLING>; }; -&mac { - slaves = <1>; +&mac_sw { mode-gpios = <&pcf_gpio_21 4 GPIO_ACTIVE_HIGH>; + status = "okay"; }; -&cpsw_emac0 { +&cpsw_port1 { phy-handle = <ðphy0>; phy-mode = "rgmii"; + ti,dual-emac-pvid = <1>; +}; + +&cpsw_port2 { + status = "disabled"; }; -&davinci_mdio { +&davinci_mdio_sw { ethphy0: ethernet-phy@3 { reg = <3>; }; diff --git a/arch/arm/boot/dts/dra76-evm.dts b/arch/arm/boot/dts/dra76-evm.dts index 803981cc762e..34f655be4fb4 100644 --- a/arch/arm/boot/dts/dra76-evm.dts +++ b/arch/arm/boot/dts/dra76-evm.dts @@ -475,25 +475,23 @@ status = "disabled"; }; -&mac { +&mac_sw { status = "okay"; - - dual_emac; }; -&cpsw_emac0 { +&cpsw_port1 { phy-handle = <&dp83867_0>; phy-mode = "rgmii-id"; - dual_emac_res_vlan = <1>; + ti,dual-emac-pvid = <1>; }; -&cpsw_emac1 { +&cpsw_port2 { phy-handle = <&dp83867_1>; phy-mode = "rgmii-id"; - dual_emac_res_vlan = <2>; + ti,dual-emac-pvid = <2>; }; -&davinci_mdio { +&davinci_mdio_sw { dp83867_0: ethernet-phy@2 { reg = <2>; ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>; -- 2.17.1