To flush the vid + mc entries from ALE, which is required when a VLAN interface is removed, driver needs to call cpsw_ale_flush_multicast() with ALE_PORT_HOST for port mask as these entries are added only for host port. Without this, these entries remain in the ALE table even after removing the VLAN interface. cpsw_ale_flush_multicast() calls cpsw_ale_flush_mcast which expects a port mask to do the job. Signed-off-by: Murali Karicheri <m-karicheri2@xxxxxx> --- v2: Dropped 3/3 and re-sending as it need more work drivers/net/ethernet/ti/cpsw_new.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/ti/cpsw_new.c b/drivers/net/ethernet/ti/cpsw_new.c index 1247d35d42ef..8d0a2bc7128d 100644 --- a/drivers/net/ethernet/ti/cpsw_new.c +++ b/drivers/net/ethernet/ti/cpsw_new.c @@ -1044,7 +1044,7 @@ static int cpsw_ndo_vlan_rx_kill_vid(struct net_device *ndev, HOST_PORT_NUM, ALE_VLAN, vid); cpsw_ale_del_mcast(cpsw->ale, priv->ndev->broadcast, 0, ALE_VLAN, vid); - cpsw_ale_flush_multicast(cpsw->ale, 0, vid); + cpsw_ale_flush_multicast(cpsw->ale, ALE_PORT_HOST, vid); err: pm_runtime_put(cpsw->dev); return ret; -- 2.17.1
