In any case the HDMI bug has reappeared while testing 5.9-rc1, although I can get the display to work by doing 'modprobe omapdrm' even if HDMI is enabled (as before it loads automatically if HDMI is disabled). Best David On Wed, 2020-08-19 at 08:58 +0300, Tony Lindgren wrote: > * H. Nikolaus Schaller <hns@xxxxxxxxxxxxx> [200818 09:58]: > > > Am 18.08.2020 um 11:51 schrieb David Shah <dave@xxxxxx>: > > > > > > DSI was not probing due to base address off by 0x1000, and > > > sys_clk > > > missing. > > > > > > With this patch, the Pyra display works if HDMI is disabled in > > > the > > > device tree. > > > > For me it also works if HDMI is not disabled. > > So IMHO this comment is misleading. > > > > Otherwise, > > > > Tested-by: H. Nikolaus Schaller <hns@xxxxxxxxxxxxx> > > Thanks pushed out into fixes. Looks like I missed removing the > HDMI disabled comment part but seems like that's not critical > and don't want to redo the branch after pushing out. > > Regards, > > Tony > _______________________________________________ > https://projects.goldelico.com/p/gta04-kernel/ > Letux-kernel mailing list > Letux-kernel@xxxxxxxxxxxxxxx > http://lists.goldelico.com/mailman/listinfo.cgi/letux-kernel
