Re: [PATCH v4 03/14] PCI: cadence: Add support to use custom read and write accessors

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Rob,

On 5/21/2020 3:37 AM, Rob Herring wrote:
> On Wed, May 06, 2020 at 08:44:18PM +0530, Kishon Vijay Abraham I wrote:
>> Add support to use custom read and write accessors. Platforms that
>> don't support half word or byte access or any other constraint
>> while accessing registers can use this feature to populate custom
>> read and write accessors. These custom accessors are used for both
>> standard register access and configuration space register access of
>> the PCIe host bridge.
>>
>> Signed-off-by: Kishon Vijay Abraham I <kishon@xxxxxx>
>> ---
>>  drivers/pci/controller/cadence/pcie-cadence.h | 107 +++++++++++++++---
>>  1 file changed, 94 insertions(+), 13 deletions(-)
> 
> Actually, take back my R-by...
> 
>>
>> diff --git a/drivers/pci/controller/cadence/pcie-cadence.h b/drivers/pci/controller/cadence/pcie-cadence.h
>> index df14ad002fe9..70b6b25153e8 100644
>> --- a/drivers/pci/controller/cadence/pcie-cadence.h
>> +++ b/drivers/pci/controller/cadence/pcie-cadence.h
>> @@ -223,6 +223,11 @@ enum cdns_pcie_msg_routing {
>>  	MSG_ROUTING_GATHER,
>>  };
>>  
>> +struct cdns_pcie_ops {
>> +	u32	(*read)(void __iomem *addr, int size);
>> +	void	(*write)(void __iomem *addr, int size, u32 value);
>> +};
>> +
>>  /**
>>   * struct cdns_pcie - private data for Cadence PCIe controller drivers
>>   * @reg_base: IO mapped register base
>> @@ -239,7 +244,7 @@ struct cdns_pcie {
>>  	int			phy_count;
>>  	struct phy		**phy;
>>  	struct device_link	**link;
>> -	const struct cdns_pcie_common_ops *ops;
>> +	const struct cdns_pcie_ops *ops;
>>  };
>>  
>>  /**
>> @@ -299,69 +304,145 @@ struct cdns_pcie_ep {
>>  /* Register access */
>>  static inline void cdns_pcie_writeb(struct cdns_pcie *pcie, u32 reg, u8 value)
>>  {
>> -	writeb(value, pcie->reg_base + reg);
>> +	void __iomem *addr = pcie->reg_base + reg;
>> +
>> +	if (pcie->ops && pcie->ops->write) {
>> +		pcie->ops->write(addr, 0x1, value);
>> +		return;
>> +	}
>> +
>> +	writeb(value, addr);
>>  }
>>  
>>  static inline void cdns_pcie_writew(struct cdns_pcie *pcie, u32 reg, u16 value)
>>  {
>> -	writew(value, pcie->reg_base + reg);
>> +	void __iomem *addr = pcie->reg_base + reg;
>> +
>> +	if (pcie->ops && pcie->ops->write) {
>> +		pcie->ops->write(addr, 0x2, value);
>> +		return;
>> +	}
>> +
>> +	writew(value, addr);
>>  }
> 
> cdns_pcie_writeb and cdns_pcie_writew are used, so remove them.
> 
>>  
>>  static inline void cdns_pcie_writel(struct cdns_pcie *pcie, u32 reg, u32 value)
>>  {
>> -	writel(value, pcie->reg_base + reg);
>> +	void __iomem *addr = pcie->reg_base + reg;
>> +
>> +	if (pcie->ops && pcie->ops->write) {
>> +		pcie->ops->write(addr, 0x4, value);
>> +		return;
>> +	}
>> +
>> +	writel(value, addr);
> 
> writel isn't broken for you, so you don't need this either.
> 
>>  }
>>  
>>  static inline u32 cdns_pcie_readl(struct cdns_pcie *pcie, u32 reg)
>>  {
>> -	return readl(pcie->reg_base + reg);
>> +	void __iomem *addr = pcie->reg_base + reg;
>> +
>> +	if (pcie->ops && pcie->ops->read)
>> +		return pcie->ops->read(addr, 0x4);
>> +
>> +	return readl(addr);
> 
> And neither is readl.

Sure, I'll remove all the unused functions and avoid using ops for readl and
writel.
> 
>>  }
>>  
>>  /* Root Port register access */
>>  static inline void cdns_pcie_rp_writeb(struct cdns_pcie *pcie,
>>  				       u32 reg, u8 value)
>>  {
>> -	writeb(value, pcie->reg_base + CDNS_PCIE_RP_BASE + reg);
>> +	void __iomem *addr = pcie->reg_base + CDNS_PCIE_RP_BASE + reg;
>> +
>> +	if (pcie->ops && pcie->ops->write) {
>> +		pcie->ops->write(addr, 0x1, value);
>> +		return;
>> +	}
>> +
>> +	writeb(value, addr);
>>  }
>>  
>>  static inline void cdns_pcie_rp_writew(struct cdns_pcie *pcie,
>>  				       u32 reg, u16 value)
>>  {
>> -	writew(value, pcie->reg_base + CDNS_PCIE_RP_BASE + reg);
>> +	void __iomem *addr = pcie->reg_base + CDNS_PCIE_RP_BASE + reg;
>> +
>> +	if (pcie->ops && pcie->ops->write) {
>> +		pcie->ops->write(addr, 0x2, value);
>> +		return;
>> +	}
>> +
>> +	writew(value, addr);
> 
> You removed 2 out of 3 calls to this. I think I'd just make the root 
> port writes always be 32-bit. It is all just one time init stuff 
> anyways.
> 
> Either rework the calls to assemble the data into 32-bits or keep these 
> functions and do the RMW here.

The problem with assembling data into 32-bits is we have to read/write with
different offsets. We'll give PCI_VENDOR_ID offset for modifying deviceID,
PCI_INTERRUPT_LINE for modifying INTERRUPT_PIN which might get non-intuitive.
Similarly in endpoint we read and write to MSI_FLAGS (which is at offset 2) we
have to directly use MSI capability offset.

And doing RMW in the accessors would mean the same RMW op is repeated. So if we
just have cdns_pcie_rp_writeb() and cdns_pcie_rp_writew(), the same code will
be repeated here twice.

IMHO using ops is a lot cleaner for these cases. IMHO except for removing
unused functions and not changing readl/writel, others should use ops.

Kindly let me know what you think.

Thanks
Kishon



[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux