On Mon, May 18, 2020 at 12:35 AM Sekhar Nori <nsekhar@xxxxxx> wrote: > > + Bin who maintains MUSB controller support > > On 5/18/20 8:17 AM, Adam Ford wrote: > > From what I can tell, the MUSB controller on the AM3517 hasn't worked > > in a very long time. Thanks for adding Bin. I can post of code patches as an RFC if interested. They don't work any better, but they don't work any worse either. I have modifications to the am35x glue to support cppi41, cppi41 to support am35, and updates to the device tree to point the musb controller to the am35 glue with additions for cppi41 references and some additional clocks. adam > > > > I have been going through the TRM for the AM3517, and I am convinced > > the device tree for the OTG port is wrong, but I am struggling to fix > > it. > > > > From what I can see the USB OTG Port support the CPPI 4.1 DMA > > controller, but the CPPI 4.1 only appears to support the > > DA850/OMAP-L138 and the AM335x family. > > > > It appears as if the AM35xx is a bit closer in behavior to the AM335x > > than the L138, but I was hoping either Tony, Tero or someone from TI > > might have a suggestion. > > > > The compatible flag need to be something like "compatible = > > "ti,am35xx-musb" and not omap3, because OMAP3 doesn't support the CPPI > > 4.1 DMA controller and the AM3517 does. > > > > Secondly, we need to update a couple of the tables in the cppi driver > > to support the am3517, and lastly, the device tree node needs to > > support the CPPI driver. > > > > It looks like the DA850/L138 makes the CPPI driver a sub-node of the > > OTG port, while the am335x has it as a separate node from the USB > > controller. > > > > From what I can tell on the AM3517, the CPPI DMA node should be a > > sub-node of the OTG. > > > > What I am struggling with now is the register offsets for controller, > > scheduler and queue manager. > > On both DA850 the 335x, there is an explicit table entry showing the > > offset of DMAREVID, which tells the DMA revision ID. I cannot find a > > corresponding register for the AM3517, yet the AM3517 > > > > FWICT, the scheduler is offset 0x2000 with respect to the OTG > > controller, and the Queue Manager register is at 0ffset 0x4000, both > > with respect to the OTG base address. Unfortunately, I am not finding > > the offset for the CDMA controller itself. > > > > Can someone tell me what it should be? I am guessing it would be near > > the 0x1000 offset, but it's a pure guess. > > > > adam > > >
