Add a binding document for a generic serdev-ngsm driver that can be used to bring up TS 27.010 line discipline with Linux n_gsm support on a serial port. As the Motorola Mapphone modems require some custom handling, they are handled with a separate compatible. Let's also add vendor string for ETSI as we're using a ETSI 3GPP TS 27.010 standard. Signed-off-by: Tony Lindgren <tony@xxxxxxxxxxx> --- .../bindings/serdev/serdev-ngsm.yaml | 64 +++++++++++++++++++ .../devicetree/bindings/vendor-prefixes.yaml | 2 + 2 files changed, 66 insertions(+) create mode 100644 Documentation/devicetree/bindings/serdev/serdev-ngsm.yaml diff --git a/Documentation/devicetree/bindings/serdev/serdev-ngsm.yaml b/Documentation/devicetree/bindings/serdev/serdev-ngsm.yaml new file mode 100644 --- /dev/null +++ b/Documentation/devicetree/bindings/serdev/serdev-ngsm.yaml @@ -0,0 +1,64 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/serdev/serdev-ngsm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Generic serdev-ngsm TS 27.010 driver + +maintainers: + - Tony Lindgren <tony@xxxxxxxxxxx> + +properties: + compatible: + enum: + - etsi,3gpp-ts27010-adaption1 + - motorola,mapphone-mdm6600-serial + + ttymask: + $ref: /schemas/types.yaml#/definitions/uint64 + description: Mask of the TS 27.010 channel TTY interfaces to start (64 bit) + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + +allOf: + - if: + properties: + compatible: + contains: + const: motorola,mapphone-mdm6600-serial + then: + properties: + phys: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: USB PHY needed for shared GPIO PM wake-up pins + maxItems: 1 + + phy-names: + description: Name of the USB PHY + const: usb + + required: + - phys + - phy-names + +required: + - compatible + - ttymask + - "#address-cells" + - "#size-cells" + +examples: + - | + modem { + compatible = "motorola,mapphone-mdm6600-serial"; + ttymask = <0 0x00001fee>; + phys = <&fsusb1_phy>; + phy-names = "usb"; + #address-cells = <1>; + #size-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml @@ -323,6 +323,8 @@ patternProperties: description: Espressif Systems Co. Ltd. "^est,.*": description: ESTeem Wireless Modems + "^etsi,.*": + description: ETSI "^ettus,.*": description: NI Ettus Research "^eukrea,.*": -- 2.26.2
