Hi Richard, All,
This is re-spin of patches to add CPSW IRQ and HW_TS_PUSH events support I've
sent long time ago [1]. In this series, I've tried to restructure and split changes,
and also add few additional optimizations comparing to initial RFC submission [1].
The HW_TS_PUSH events intended to serve for different timesync purposes on of
which is to add PPS generation function, which can be implemented as below:
+-----------------+
| Control |
| application |
+------->+ +----------+
| | | |
| | | |
| +-----------------+ |
| |
| |
| PTP_EXTTS_REQUEST |
| |
| |
+----------------------------------------------------------------+
| | Kernel
+-------+----------+ +-------v--------+
| \dev\ptpX | | /sys/class/pwm/|
| | | |
+-------^----------+ +-------+--------+
| |
| |
| +-------v-------------------+
+-------+----------+ | |
| CPTS driver | |pwm/pwm-omap-dmtimer.c |
| | +---------------------------+
+-------^----------+ |clocksource/timer_ti_dm.c |
| +-------+-------------------+
|HWx_TS_PUSH evt |
+----------------------------------------------------------------+
| | HW
+-------+----------+ +-------v--------+
| CPTS | | DMTimer |
| | | |
| HWx_TS_PUSH X<-----------------+ |
| + | |
+------------------+ +-------+--------+
|
X timer4
As per my knowledge there is at least one public implemented above PPS generation
schema from Tusori Tibor [2] based on initial HW_TS_PUSH enable submission[1].
And now there is work done by Lokesh Vutla <lokeshvutla@xxxxxx> published to
enable PWM enable/improve PWM adjustment from user space [3][4][5].
Main changes comparing to initial submission:
- TX timestamp processing deferred to ptp worker only
- both CPTS IRQ and polling events processing supported to make it work for
Keystone 2 also
- switch to use new .gettimex64() interface
- no DT updates as number of HWx_TS_PUSH inputs is static per HW
Testing on am571x-idk/omap2plus_defconfig/+CONFIG_PREEMPT=y:
1) testing HW_TS_PUSH
- enable pwm in DT
pwm16: dmtimer-pwm {
compatible = "ti,omap-dmtimer-pwm";
ti,timers = <&timer16>;
#pwm-cells = <3>;
};
- configure and start pwm
echo 0 > /sys/class/pwm/pwmchip0/export
echo 1000000000 > /sys/class/pwm/pwmchip0/pwm0/period
echo 500000000 > /sys/class/pwm/pwmchip0/pwm0/duty_cycle
echo 1 > /sys/class/pwm/pwmchip0/pwm0/enable
- test HWx_TS_PUSH using Kernel selftest testptp application
./tools/testing/selftests/ptp/testptp -d /dev/ptp0 -e 1000 -i 3
2) testing phc2sys
# ./linuxptp/phc2sys -s CLOCK_REALTIME -c eth0 -m -O 0 -u30
phc2sys[1616.791]: eth0 rms 408190379792180864 max 1580914543017209856 freq +864 +/- 4635 delay 645 +/- 29
phc2sys[1646.795]: eth0 rms 41 max 108 freq +0 +/- 36 delay 656 +/- 29
phc2sys[1676.800]: eth0 rms 43 max 83 freq +2 +/- 38 delay 650 +/- 0
phc2sys[1706.804]: eth0 rms 39 max 87 freq +4 +/- 34 delay 672 +/- 55
phc2sys[1736.808]: eth0 rms 35 max 66 freq +1 +/- 30 delay 667 +/- 49
phc2sys[1766.813]: eth0 rms 38 max 79 freq +2 +/- 33 delay 656 +/- 29
phc2sys[1796.817]: eth0 rms 45 max 98 freq +1 +/- 39 delay 656 +/- 29
phc2sys[1826.821]: eth0 rms 40 max 87 freq +5 +/- 35 delay 650 +/- 0
phc2sys[1856.826]: eth0 rms 29 max 76 freq -0 +/- 25 delay 656 +/- 29
phc2sys[1886.830]: eth0 rms 40 max 97 freq +4 +/- 35 delay 667 +/- 49
phc2sys[1916.834]: eth0 rms 42 max 94 freq +2 +/- 36 delay 661 +/- 41
phc2sys[1946.839]: eth0 rms 40 max 91 freq +2 +/- 35 delay 661 +/- 41
phc2sys[1976.843]: eth0 rms 46 max 88 freq -0 +/- 40 delay 667 +/- 49
phc2sys[2006.847]: eth0 rms 49 max 97 freq +2 +/- 43 delay 650 +/- 0
3) testing ptp4l
- 1G connection
# ./linuxptp/ptp4l -P -2 -H -i eth0 -l 6 -m -q -p /dev/ptp0 -f ptp.cfg -s
ptp4l[862.891]: port 1: UNCALIBRATED to SLAVE on MASTER_CLOCK_SELECTED
ptp4l[923.894]: rms 1019697354682 max 5768279314068 freq +26053 +/- 72 delay 488 +/- 1
ptp4l[987.896]: rms 13 max 26 freq +26005 +/- 29 delay 488 +/- 1
ptp4l[1051.899]: rms 14 max 50 freq +25895 +/- 21 delay 488 +/- 1
ptp4l[1115.901]: rms 11 max 27 freq +25878 +/- 17 delay 488 +/- 1
ptp4l[1179.904]: rms 10 max 27 freq +25857 +/- 12 delay 488 +/- 1
ptp4l[1243.906]: rms 14 max 37 freq +25851 +/- 15 delay 488 +/- 1
ptp4l[1307.909]: rms 12 max 33 freq +25835 +/- 15 delay 488 +/- 1
ptp4l[1371.911]: rms 11 max 27 freq +25832 +/- 14 delay 488 +/- 1
ptp4l[1435.914]: rms 11 max 26 freq +25823 +/- 11 delay 488 +/- 1
ptp4l[1499.916]: rms 10 max 29 freq +25829 +/- 11 delay 489 +/- 1
ptp4l[1563.919]: rms 11 max 27 freq +25827 +/- 12 delay 488 +/- 1
- 10M connection
# ./linuxptp/ptp4l -P -2 -H -i eth0 -l 6 -m -q -p /dev/ptp0 -f ptp.cfg -s
ptp4l[51.955]: port 1: UNCALIBRATED to SLAVE on MASTER_CLOCK_SELECTED
ptp4l[112.957]: rms 279468848453933920 max 1580914542977391360 freq +25390 +/- 3207 delay 8222 +/- 36
ptp4l[176.960]: rms 254 max 522 freq +25809 +/- 219 delay 8271 +/- 30
ptp4l[240.962]: rms 271 max 684 freq +25868 +/- 234 delay 8249 +/- 22
ptp4l[304.965]: rms 263 max 556 freq +25894 +/- 227 delay 8225 +/- 47
ptp4l[368.967]: rms 238 max 648 freq +25908 +/- 204 delay 8234 +/- 40
ptp4l[432.970]: rms 274 max 658 freq +25932 +/- 237 delay 8241 +/- 22
ptp4l[496.972]: rms 247 max 557 freq +25943 +/- 213 delay 8223 +/- 26
ptp4l[560.974]: rms 291 max 756 freq +25968 +/- 251 delay 8244 +/- 41
ptp4l[624.977]: rms 249 max 697 freq +25975 +/- 216 delay 8258 +/- 22
Changes in v4:
- fixed comments from Richard Cochran
- dropped patch "net: ethernet: ti: cpts: move rx timestamp processing to ptp
worker only"
- added "Acked-by" from Richard Cochran <richardcochran@xxxxxxxxx>
- dependencies resolved, patch merged
Changes in v3:
- fixed rebase mess
- fixed build issues
Changes in v2 (broken):
- fixed (formatting) comments from David Miller <davem@xxxxxxxxxxxxx>
v3: https://patchwork.ozlabs.org/project/netdev/cover/20200320194244.4703-1-grygorii.strashko@xxxxxx/
v2: https://patchwork.ozlabs.org/cover/1258339/
v1: https://patchwork.ozlabs.org/cover/1254708/
[1] https://lore.kernel.org/patchwork/cover/799251/
[2] https://usermanual.wiki/Document/SetupGuide.632280828.pdf
https://github.com/t-tibor/msc_thesis
[3] https://patchwork.kernel.org/cover/11421329/
[4] https://patchwork.kernel.org/cover/11433197/
[5] https://sourceforge.net/p/linuxptp/mailman/message/36943248/
Grygorii Strashko (10):
net: ethernet: ti: cpts: use dev_yy() api for logs
net: ethernet: ti: cpts: separate hw counter read from timecounter
net: ethernet: ti: cpts: move tc mult update in cpts_fifo_read()
net: ethernet: ti: cpts: switch to use new .gettimex64() interface
net: ethernet: ti: cpts: optimize packet to event matching
net: ethernet: ti: cpts: move tx timestamp processing to ptp worker
only
net: ethernet: ti: cpts: rework locking
net: ethernet: ti: cpts: add irq support
net: ethernet: ti: cpts: add support for HW_TS_PUSH events
net: ethernet: ti: cpsw: enable cpts irq
drivers/net/ethernet/ti/cpsw.c | 21 ++
drivers/net/ethernet/ti/cpsw_new.c | 20 ++
drivers/net/ethernet/ti/cpsw_priv.c | 17 +-
drivers/net/ethernet/ti/cpsw_priv.h | 2 +
drivers/net/ethernet/ti/cpts.c | 421 +++++++++++++++++---------
drivers/net/ethernet/ti/cpts.h | 27 +-
drivers/net/ethernet/ti/netcp_ethss.c | 3 +-
7 files changed, 362 insertions(+), 149 deletions(-)
--
2.17.1
