Re: [PATCH v2] ARM: dts: am5729: beaglebone-ai: adding device tree

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Mar 31, 2020 at 8:46 PM Tony Lindgren <tony@xxxxxxxxxxx> wrote:
>
> * Drew Fustini <pdp7pdp7@xxxxxxxxx> [200331 18:39]:
> > On Thu, Dec 12, 2019 at 6:06 PM Tony Lindgren <tony@xxxxxxxxxxx> wrote:
> > > > On 21/11/2019 00:05, Caleb Robey wrote:
> > > > > From: Jason Kridner <jdk@xxxxxx>
> > > > >
> > > > > BeagleBoard.org BeagleBone AI is an open source hardware single
> > > > > board computer based on the Texas Instruments AM5729 SoC featuring
> > > > > dual-core 1.5GHz Arm Cortex-A15 processor, dual-core C66 digital
> > > > > signal processor (DSP), quad-core embedded vision engine (EVE),
> > > > > Arm Cortex-M4 processors, dual programmable realtime unit
> > > > > industrial control subsystems and more. The board features 1GB
> > > > > DDR3L, USB3.0 Type-C, USB HS Type-A, microHDMI, 16GB eMMC flash,
> > > > > 1G Ethernet, 802.11ac 2/5GHz, Bluetooth, and BeagleBone expansion
> > > > > headers.
> > > > >
> > > > > For more information, refer to:
> > > > > https://beaglebone.ai
> > > > >
> > > > > This patch introduces the BeagleBone AI device tree.
> > > > >
> > > > > Note that the device use the "ti,tpd12s016" component which is
> > > > > software compatible with "ti,tpd12s015". Thus we only use the
> > > > > latter driver.
> > > >
> > > > Ah. thanks. I see my comments resolved here.
> > > > no more comments to net part from my side.
> > >
> > > Just FYI, Jason had one pending comment on the earlier version
> > > about the compatible property to use.
> > >
> > > So I'm assuming there will be a new version posted, tagging
> > > this one as read.
> >
> > It came to my attention today when talking with Jason Kridner and
> > Robert Nelson that we did not get the BeagleBone AI device tree
> > upstream yet.
> >
> > I am having trouble identifying what the pending comment was from the
> > original patch series.
> >
> > Was it related to this compatible string?
> >
> > > +       compatible = "beagleboard.org,am5729-beagleboneai", "ti,am5728",
>
> Yes I think Jason had some comment on the compatible string
> to use.

Ah, I see it now [1]:

> Probably need to change "beagleboard.org," to "beagle," as of today.
> With the new yaml stuff for defining device tree entries, having the
> period (.) in the vendor identifier can be a bit confusing. I altered
> my submission to avoid this.

so I think this should work:

compatible = "beagleboard-org,am5729-beagleboneai", "ti,am5728",

We'll get it resubmitted.

Thanks,
Drew

[1] https://lore.kernel.org/linux-devicetree/CA+T6QPm-DNG_QoAMWw_zUDUkZCfhbBTgygnoPAykf3mgK7opaA@xxxxxxxxxxxxxx/



[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux