Check this thread.. http://marc.info/?l=linux-omap&m=124224222324953&w=2 >-----Original Message----- >From: linux-omap-owner@xxxxxxxxxxxxxxx >[mailto:linux-omap-owner@xxxxxxxxxxxxxxx] On Behalf Of Raju Sana >Sent: Thursday, July 02, 2009 3:50 PM >To: linux-omap@xxxxxxxxxxxxxxx >Subject: 2.6.30 jiffies problem > >Hi all, > >I have pulled kernel from linux-omap git's 2.6.30 branch ( >http://git.kernel.org/?p=linux/kernel/git/tmlind/linux-omap-2.6 >.git;a=shortlog;h=omap-2.6.30 >) and trying to boot on my OMAP3 beagle board (Rev. B4). It got stuck >at Calibrating delay loop..... > >From the below log I found that the jiffies value is not getting >incremented and couldn't able to come out of the loop > >I found that the OMAP_TICK_GPTIMER which is responsible for the system >tick from the arch/arm/plat-omap/Kconfig is missing in 2.6.30. Can you >guys put some light on what is going wrong ? > >Thanks and Regards, >Venkat Raju. > > >Boot Log:- > >Starting kernel ... > >Uncompressing >Linux.......................................................... >..................................................... >done, booting the kernel. ><5>Linux version 2.6.30-omap1-06025-g9474788 >(root@xxxxxxxxxxxxxxxxxxxxx) (gcc version 4.2.1 (CodeSourcery Sourcery >G++ Lite 2007q3-51)) #5 Thu Jul 2 10:22:30 IST 2009 >CPU: ARMv7 Processor [411fc082] revision 2 (ARMv7), cr=10c5387f >CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache >Machine: OMAP3 Beagle Board >Memory policy: ECC disabled, Data cache writeback ><7>On node 0 totalpages: 32768 ><7>free_area_init_node: node 0, pgdat c03677e0, node_mem_map c0383000 ><7> Normal zone: 256 pages used for memmap ><7> Normal zone: 0 pages reserved ><7> Normal zone: 32512 pages, LIFO batch:7 ><6>OMAP3430 ES2.1 ><6>SRAM: Mapped pa 0x40200000 to va 0xd7000000 size: 0x100000 >Built 1 zonelists in Zone order, mobility grouping on. Total >pages: 32512 ><5>Kernel command line: console=ttyS2,115200n8 noinitrd >root=/dev/mmcblk0p2 video=omapfb.mode=dvi:1280x720MR-24@50 init=/init >rootfstype=ext3 rw rootdelay=1 nohz=off androidboo2 ><3>Unknown boot option `androidboot.console=ttyS2': ignoring ><6>NR_IRQS:368 ><6>Clocking rate (Crystal/DPLL/ARM core): 26.0/332/500 MHz ><6>Reprogramming SDRC clock to 332000000 Hz ><6>GPMC revision 5.0 ><6>IRQ: Found an INTC at 0xd8200000 (revision 4.0) with 96 interrupts ><6>Total of 96 interrupts on 1 active controller ><6>OMAP34xx GPIO hardware version 2.5 >PID hash table entries: 512 (order: 9, 2048 bytes) ><6>OMAP clockevent source: GPTIMER12 at 32768 Hz >Console: colour dummy device 80x30 ><6>Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) ><6>Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) ><6>Memory: 128MB = 128MB total ><5>Memory: 126192KB available (3056K code, 284K data, 112K >init, 0K highmem) ><6>Calibrating delay loop... >-- >To unsubscribe from this list: send the line "unsubscribe >linux-omap" in >the body of a message to majordomo@xxxxxxxxxxxxxxx >More majordomo info at http://vger.kernel.org/majordomo-info.html > >-- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
