[PATCHv2 26/56] drm/omap: dsi: move TE GPIO handling into core

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



In preparation for removing custom DSS calls from the DSI
panel driver, this moves support for external tearing event
GPIOs into the DSI host driver. This way tearing events are
always handled in the core resulting in simplification of
the panel drivers.

The TE GPIO acquisition follows works in the same way as the
exynos DSI implementation.

Signed-off-by: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>
---
 .../gpu/drm/omapdrm/displays/panel-dsi-cm.c   | 101 +------------
 drivers/gpu/drm/omapdrm/dss/dsi.c             | 140 ++++++++++++++++--
 2 files changed, 135 insertions(+), 106 deletions(-)

diff --git a/drivers/gpu/drm/omapdrm/displays/panel-dsi-cm.c b/drivers/gpu/drm/omapdrm/displays/panel-dsi-cm.c
index 79ac1f6b375a..30e48d0de961 100644
--- a/drivers/gpu/drm/omapdrm/displays/panel-dsi-cm.c
+++ b/drivers/gpu/drm/omapdrm/displays/panel-dsi-cm.c
@@ -54,7 +54,6 @@ struct panel_drv_data {
 
 	/* panel HW configuration from DT or platform data */
 	struct gpio_desc *reset_gpio;
-	struct gpio_desc *ext_te_gpio;
 
 	struct regulator_bulk_data supplies[DCS_REGULATOR_SUPPLY_NUM];
 
@@ -68,10 +67,6 @@ struct panel_drv_data {
 
 	bool te_enabled;
 
-	atomic_t do_update;
-
-	struct delayed_work te_timeout_work;
-
 	bool intro_printed;
 
 	struct workqueue_struct *workqueue;
@@ -83,8 +78,6 @@ struct panel_drv_data {
 
 #define to_panel_data(p) container_of(p, struct panel_drv_data, dssdev)
 
-static irqreturn_t dsicm_te_isr(int irq, void *data);
-static void dsicm_te_timeout_work_callback(struct work_struct *work);
 static int _dsicm_enable_te(struct panel_drv_data *ddata, bool enable);
 
 static int dsicm_panel_reset(struct panel_drv_data *ddata);
@@ -240,9 +233,6 @@ static int dsicm_enter_ulps(struct panel_drv_data *ddata)
 	if (r)
 		goto err;
 
-	if (ddata->ext_te_gpio)
-		disable_irq(gpiod_to_irq(ddata->ext_te_gpio));
-
 	src->ops->dsi.disable(src, false, true);
 
 	ddata->ulps_enabled = true;
@@ -271,15 +261,12 @@ static int dsicm_exit_ulps(struct panel_drv_data *ddata)
 	src->ops->enable(src);
 	ddata->dsi->mode_flags &= ~MIPI_DSI_MODE_LPM;
 
-	r = _dsicm_enable_te(ddata, true);
+	r = _dsicm_enable_te(ddata, ddata->te_enabled);
 	if (r) {
 		dev_err(&ddata->dsi->dev, "failed to re-enable TE");
 		goto err2;
 	}
 
-	if (ddata->ext_te_gpio)
-		enable_irq(gpiod_to_irq(ddata->ext_te_gpio));
-
 	dsicm_queue_ulps_work(ddata);
 
 	ddata->ulps_enabled = false;
@@ -290,11 +277,8 @@ static int dsicm_exit_ulps(struct panel_drv_data *ddata)
 	dev_err(&ddata->dsi->dev, "failed to exit ULPS");
 
 	r = dsicm_panel_reset(ddata);
-	if (!r) {
-		if (ddata->ext_te_gpio)
-			enable_irq(gpiod_to_irq(ddata->ext_te_gpio));
+	if (!r)
 		ddata->ulps_enabled = false;
-	}
 
 	dsicm_queue_ulps_work(ddata);
 
@@ -745,43 +729,6 @@ static void dsicm_framedone_cb(int err, void *data)
 	src->ops->dsi.bus_unlock(src);
 }
 
-static irqreturn_t dsicm_te_isr(int irq, void *data)
-{
-	struct panel_drv_data *ddata = data;
-	struct omap_dss_device *src = ddata->src;
-	int old;
-	int r;
-
-	old = atomic_cmpxchg(&ddata->do_update, 1, 0);
-
-	if (old) {
-		cancel_delayed_work(&ddata->te_timeout_work);
-
-		r = src->ops->dsi.update(src, ddata->dsi->channel, dsicm_framedone_cb,
-				ddata);
-		if (r)
-			goto err;
-	}
-
-	return IRQ_HANDLED;
-err:
-	dev_err(&ddata->dsi->dev, "start update failed\n");
-	src->ops->dsi.bus_unlock(src);
-	return IRQ_HANDLED;
-}
-
-static void dsicm_te_timeout_work_callback(struct work_struct *work)
-{
-	struct panel_drv_data *ddata = container_of(work, struct panel_drv_data,
-					te_timeout_work.work);
-	struct omap_dss_device *src = ddata->src;
-
-	dev_err(&ddata->dsi->dev, "TE not received for 250ms!\n");
-
-	atomic_set(&ddata->do_update, 0);
-	src->ops->dsi.bus_unlock(src);
-}
-
 static int dsicm_update(struct omap_dss_device *dssdev,
 				    u16 x, u16 y, u16 w, u16 h)
 {
@@ -809,16 +756,10 @@ static int dsicm_update(struct omap_dss_device *dssdev,
 	if (r)
 		goto err;
 
-	if (ddata->te_enabled && ddata->ext_te_gpio) {
-		schedule_delayed_work(&ddata->te_timeout_work,
-				msecs_to_jiffies(250));
-		atomic_set(&ddata->do_update, 1);
-	} else {
-		r = src->ops->dsi.update(src, ddata->dsi->channel, dsicm_framedone_cb,
-				ddata);
-		if (r)
-			goto err;
-	}
+	r = src->ops->dsi.update(src, ddata->dsi->channel, dsicm_framedone_cb,
+			ddata);
+	if (r)
+		goto err;
 
 	/* note: no bus_unlock here. unlock is src framedone_cb */
 	mutex_unlock(&ddata->lock);
@@ -840,8 +781,7 @@ static int _dsicm_enable_te(struct panel_drv_data *ddata, bool enable)
 	else
 		r = mipi_dsi_dcs_set_tear_off(dsi);
 
-	if (!ddata->ext_te_gpio)
-		src->ops->dsi.enable_te(src, enable);
+	src->ops->dsi.enable_te(src, enable);
 
 	/* possible panel bug */
 	msleep(100);
@@ -934,14 +874,6 @@ static int dsicm_probe_of(struct mipi_dsi_device *dsi)
 		return err;
 	}
 
-	ddata->ext_te_gpio = devm_gpiod_get_optional(&dsi->dev, "te",
-						     GPIOD_IN);
-	if (IS_ERR(ddata->ext_te_gpio)) {
-		err = PTR_ERR(ddata->ext_te_gpio);
-		dev_err(&dsi->dev, "TE gpio request failed: %d", err);
-		return err;
-	}
-
 	err = of_get_display_timing(node, "panel-timing", &timing);
 	if (!err) {
 		videomode_from_timing(&timing, &ddata->vm);
@@ -1026,25 +958,6 @@ static int dsicm_probe(struct mipi_dsi_device *dsi)
 
 	mutex_init(&ddata->lock);
 
-	atomic_set(&ddata->do_update, 0);
-
-	if (ddata->ext_te_gpio) {
-		r = devm_request_irq(dev, gpiod_to_irq(ddata->ext_te_gpio),
-				dsicm_te_isr,
-				IRQF_TRIGGER_RISING,
-				"taal vsync", ddata);
-
-		if (r) {
-			dev_err(dev, "IRQ request failed\n");
-			goto err_reg;
-		}
-
-		INIT_DEFERRABLE_WORK(&ddata->te_timeout_work,
-					dsicm_te_timeout_work_callback);
-
-		dev_dbg(dev, "Using GPIO TE\n");
-	}
-
 	ddata->workqueue = create_singlethread_workqueue("dsicm_wq");
 	if (!ddata->workqueue) {
 		r = -ENOMEM;
diff --git a/drivers/gpu/drm/omapdrm/dss/dsi.c b/drivers/gpu/drm/omapdrm/dss/dsi.c
index 15298ebb9d69..7c160512c886 100644
--- a/drivers/gpu/drm/omapdrm/dss/dsi.c
+++ b/drivers/gpu/drm/omapdrm/dss/dsi.c
@@ -14,7 +14,9 @@
 #include <linux/device.h>
 #include <linux/err.h>
 #include <linux/interrupt.h>
+#include <linux/irq.h>
 #include <linux/delay.h>
+#include <linux/gpio/consumer.h>
 #include <linux/mutex.h>
 #include <linux/module.h>
 #include <linux/semaphore.h>
@@ -371,6 +373,11 @@ struct dsi_data {
 	unsigned int update_bytes;
 #endif
 
+	/* external TE GPIO */
+	struct gpio_desc *te_gpio;
+	struct delayed_work te_timeout_work;
+	atomic_t do_ext_te_update;
+
 	bool te_enabled;
 	bool ulps_enabled;
 
@@ -3834,19 +3841,12 @@ static void dsi_framedone_irq_callback(void *data)
 	dsi_handle_framedone(dsi, 0);
 }
 
-static int dsi_update(struct omap_dss_device *dssdev, int channel,
-		void (*callback)(int, void *), void *data)
+static int _dsi_update(struct dsi_data *dsi)
 {
-	struct dsi_data *dsi = to_dsi_data(dssdev);
 	u16 dw, dh;
 
 	dsi_perf_mark_setup(dsi);
 
-	dsi->update_channel = channel;
-
-	dsi->framedone_callback = callback;
-	dsi->framedone_data = data;
-
 	dw = dsi->vm.hactive;
 	dh = dsi->vm.vactive;
 
@@ -3859,6 +3859,26 @@ static int dsi_update(struct omap_dss_device *dssdev, int channel,
 	return 0;
 }
 
+static int dsi_update(struct omap_dss_device *dssdev, int channel,
+		void (*callback)(int, void *), void *data)
+{
+	struct dsi_data *dsi = to_dsi_data(dssdev);
+
+	dsi->update_channel = channel;
+	dsi->framedone_callback = callback;
+	dsi->framedone_data = data;
+
+	if (dsi->te_enabled && dsi->te_gpio) {
+		schedule_delayed_work(&dsi->te_timeout_work,
+				      msecs_to_jiffies(250));
+		atomic_set(&dsi->do_ext_te_update, 1);
+	} else {
+		_dsi_update(dsi);
+	}
+
+	return 0;
+}
+
 /* Display funcs */
 
 static int dsi_configure_dispc_clocks(struct dsi_data *dsi)
@@ -4102,6 +4122,14 @@ static int dsi_enable_te(struct omap_dss_device *dssdev, bool enable)
 	struct dsi_data *dsi = to_dsi_data(dssdev);
 
 	dsi->te_enabled = enable;
+
+	if (dsi->te_gpio) {
+		if (enable)
+			enable_irq(gpiod_to_irq(dsi->te_gpio));
+		else
+			disable_irq(gpiod_to_irq(dsi->te_gpio));
+	}
+
 	return 0;
 }
 
@@ -4779,11 +4807,91 @@ static const struct omap_dss_device_ops dsi_ops = {
 	},
 };
 
+static irqreturn_t omap_dsi_te_irq_handler(int irq, void *dev_id)
+{
+	struct dsi_data *dsi = (struct dsi_data*) dev_id;
+	int old;
+
+	old = atomic_cmpxchg(&dsi->do_ext_te_update, 1, 0);
+	if (old) {
+		cancel_delayed_work(&dsi->te_timeout_work);
+		_dsi_update(dsi);
+	}
+
+	return IRQ_HANDLED;
+}
+
+static void omap_dsi_te_timeout_work_callback(struct work_struct *work)
+{
+	struct dsi_data *dsi = container_of(work, struct dsi_data,
+					te_timeout_work.work);
+	int old;
+
+	old = atomic_cmpxchg(&dsi->do_ext_te_update, 1, 0);
+	if (old) {
+		dev_err(dsi->dev, "TE not received for 250ms!\n");
+		_dsi_update(dsi);
+	}
+
+	return;
+}
+
+static int omap_dsi_register_te_irq(struct dsi_data *dsi,
+				    struct mipi_dsi_device *client)
+{
+	int err;
+	int te_irq;
+
+	dsi->te_gpio = gpiod_get_from_of_node(client->dev.of_node,
+					      "te-gpios", 0, GPIOD_IN,
+					      "dsi-tearing-effect");
+	if (IS_ERR(dsi->te_gpio)) {
+		err = PTR_ERR(dsi->te_gpio);
+
+		if (err == -ENOENT) {
+			dsi->te_gpio = NULL;
+			return 0;
+		} else {
+			dev_err(dsi->dev, "Could not get TE gpio: %d\n", err);
+			return err;
+		}
+	}
+
+	te_irq = gpiod_to_irq(dsi->te_gpio);
+	irq_set_status_flags(te_irq, IRQ_NOAUTOEN);
+
+	err = request_threaded_irq(te_irq, omap_dsi_te_irq_handler, NULL,
+				   IRQF_TRIGGER_RISING, "TE", dsi);
+	if (err) {
+		dev_err(dsi->dev, "request irq failed with %d\n", err);
+		gpiod_put(dsi->te_gpio);
+		return err;
+	}
+
+	INIT_DEFERRABLE_WORK(&dsi->te_timeout_work,
+			     omap_dsi_te_timeout_work_callback);
+
+	dev_dbg(dsi->dev, "Using GPIO TE\n");
+
+	return 0;
+}
+
+static void omap_dsi_unregister_te_irq(struct dsi_data *dsi)
+{
+	if (dsi->te_gpio) {
+		free_irq(gpiod_to_irq(dsi->te_gpio), dsi);
+		cancel_delayed_work(&dsi->te_timeout_work);
+		gpiod_put(dsi->te_gpio);
+		dsi->te_gpio = NULL;
+	}
+}
+
 int omap_dsi_host_attach(struct mipi_dsi_host *host,
 			 struct mipi_dsi_device *client)
 {
 	struct dsi_data *dsi = host_to_omap(host);
 	unsigned int channel = client->channel;
+	int r;
 
 	if (channel > 3)
 		return -EINVAL;
@@ -4793,13 +4901,20 @@ int omap_dsi_host_attach(struct mipi_dsi_host *host,
 		return -EBUSY;
 	}
 
-	dsi->vc[channel].dest = client;
+	atomic_set(&dsi->do_ext_te_update, 0);
 
-	dsi->pix_fmt = client->format;
-	if (client->mode_flags & MIPI_DSI_MODE_VIDEO)
+	if (client->mode_flags & MIPI_DSI_MODE_VIDEO) {
 		dsi->mode = OMAP_DSS_DSI_VIDEO_MODE;
-	else
+	} else {
+		r = omap_dsi_register_te_irq(dsi, client);
+		if (r)
+			return r;
+
 		dsi->mode = OMAP_DSS_DSI_CMD_MODE;
+	}
+
+	dsi->vc[channel].dest = client;
+	dsi->pix_fmt = client->format;
 
 	return 0;
 }
@@ -4816,6 +4931,7 @@ int omap_dsi_host_detach(struct mipi_dsi_host *host,
 	if (dsi->vc[channel].dest != client)
 		return -EINVAL;
 
+	omap_dsi_unregister_te_irq(dsi);
 	dsi->vc[channel].dest = NULL;
 	return 0;
 }
-- 
2.25.0




[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux