At least display susbsystem (DSS) has modules with no sysconfig registers
and rely on custom function for module reset handling. Let's make reset
work with that too.
Signed-off-by: Tony Lindgren <tony@xxxxxxxxxxx>
---
drivers/bus/ti-sysc.c | 10 ++++++----
1 file changed, 6 insertions(+), 4 deletions(-)
diff --git a/drivers/bus/ti-sysc.c b/drivers/bus/ti-sysc.c
--- a/drivers/bus/ti-sysc.c
+++ b/drivers/bus/ti-sysc.c
@@ -1571,7 +1571,7 @@ static int sysc_reset(struct sysc *ddata)
sysc_offset = ddata->offsets[SYSC_SYSCONFIG];
syss_offset = ddata->offsets[SYSC_SYSSTATUS];
- if (ddata->legacy_mode || sysc_offset < 0 ||
+ if (ddata->legacy_mode ||
ddata->cap->regbits->srst_shift < 0 ||
ddata->cfg.quirks & SYSC_QUIRK_NO_RESET_ON_INIT)
return 0;
@@ -1586,9 +1586,11 @@ static int sysc_reset(struct sysc *ddata)
if (ddata->pre_reset_quirk)
ddata->pre_reset_quirk(ddata);
- sysc_val = sysc_read_sysconfig(ddata);
- sysc_val |= sysc_mask;
- sysc_write(ddata, sysc_offset, sysc_val);
+ if (sysc_offset >= 0) {
+ sysc_val = sysc_read_sysconfig(ddata);
+ sysc_val |= sysc_mask;
+ sysc_write(ddata, sysc_offset, sysc_val);
+ }
if (ddata->cfg.srst_udelay)
usleep_range(ddata->cfg.srst_udelay,
--
2.25.1
