We added coulomb counter calibration support With commit 0cb90f071f73
("power: supply: cpcap-battery: Add basic coulomb counter calibrate
support"), but we also need to configure the related interrupt.
Without the interrupt calibration happens based on a timeout after two
seconds, with the interrupt the calibration just gets done a bit faster.
Cc: Merlijn Wajer <merlijn@xxxxxxxxxx>
Cc: Pavel Machek <pavel@xxxxxx>
Signed-off-by: Tony Lindgren <tony@xxxxxxxxxxx>
---
arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi b/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi
--- a/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi
+++ b/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi
@@ -27,11 +27,12 @@
compatible = "motorola,cpcap-battery";
interrupts-extended = <
&cpcap 6 0 &cpcap 5 0 &cpcap 3 0
- &cpcap 20 0 &cpcap 54 0
+ &cpcap 20 0 &cpcap 54 0 &cpcap 57 0
>;
interrupt-names =
"eol", "lowbph", "lowbpl",
- "chrgcurr1", "battdetb";
+ "chrgcurr1", "battdetb",
+ "cccal";
io-channels = <&cpcap_adc 0 &cpcap_adc 1
&cpcap_adc 5 &cpcap_adc 6>;
io-channel-names = "battdetb", "battp",
--
2.24.1
