sawsd wang <sawsdwang@xxxxxxxxx> writes: > From c1aba8ba7af3ddd16346d95795bda71e65baa4d0 Mon Sep 17 00:00:00 2001 > From: Chunqiu Wang <cqwang@xxxxxxxxxxxx> > Date: Wed, 24 Jun 2009 06:48:52 +0800 > Subject: [PATCH] Support OMAP3 VC adaptation with different Power IC > > Current OMAP SmartReflex driver only supports TI Triton > Power IC, add a callback to make it possible to use > different PowerIC and use different settings to > configure OMAP3 Voltage Controller for DVFS > > Board file can setup a new function to have different settings > on SR to configure their Power IC for voltage scaling > > Signed-off-by: Chunqiu Wang <cqwang@xxxxxxxxxxxx> Patch is still line-wrapped in at least one place, and patch 2/2 is wrapped in several. Based on format and the headers, it doesn't look to me like you're using git-send-email. Really, git-send-email will make your life much simpler. Feel free to send me some test patches off-list so we can figure out your mailer problems. Kevin > --- > arch/arm/mach-omap2/smartreflex.c | 13 +++++++++++++ > arch/arm/mach-omap2/smartreflex.h | 4 ++++ > arch/arm/plat-omap/Kconfig | 2 +- > 3 files changed, 18 insertions(+), 1 deletions(-) > > diff --git a/arch/arm/mach-omap2/smartreflex.c > b/arch/arm/mach-omap2/smartreflex.c > index 9d462e3..bacf602 100644 > --- a/arch/arm/mach-omap2/smartreflex.c > +++ b/arch/arm/mach-omap2/smartreflex.c > @@ -52,6 +52,8 @@ struct omap_sr { > > #define SR_REGADDR(offs) (sr->srbase_addr + offset) > > +static omap3_voltagescale_vcbypass_t omap3_volscale_vcbypass_fun; > + > static inline void sr_write_reg(struct omap_sr *sr, unsigned offset, u32 value) > { > __raw_writel(value, SR_REGADDR(offset)); > @@ -767,6 +769,11 @@ void disable_smartreflex(int srid) > } > } > > +void omap3_voltagescale_vcbypass_setup(omap3_voltagescale_vcbypass_t fun) > +{ > + omap3_volscale_vcbypass_fun = fun; > +} > + > /* Voltage Scaling using SR VCBYPASS */ > int sr_voltagescale_vcbypass(u32 target_opp, u32 current_opp, > u8 target_vsel, u8 current_vsel) > @@ -779,6 +786,10 @@ int sr_voltagescale_vcbypass(u32 target_opp, u32 > current_opp, > u32 t2_smps_steps = 0; > u32 t2_smps_delay = 0; > > + if (omap3_volscale_vcbypass_fun) > + return omap3_volscale_vcbypass_fun(target_opp, current_opp, > + target_vsel, current_vsel); > + > vdd = get_vdd(target_opp); > target_opp_no = get_opp_no(target_opp); > current_opp_no = get_opp_no(current_opp); > @@ -940,6 +951,7 @@ static int __init omap3_sr_init(void) > return -ENODEV; > } > > +#ifdef CONFIG_TWL4030_CORE > /* Enable SR on T2 */ > ret = twl4030_i2c_read_u8(TWL4030_MODULE_PM_RECEIVER, &RdReg, > R_DCDC_GLOBAL_CFG); > @@ -947,6 +959,7 @@ static int __init omap3_sr_init(void) > RdReg |= DCDC_GLOBAL_CFG_ENABLE_SRFLX; > ret |= twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, RdReg, > R_DCDC_GLOBAL_CFG); > +#endif > > if (cpu_is_omap34xx()) { > sr1.clk = clk_get(NULL, "sr1_fck"); > diff --git a/arch/arm/mach-omap2/smartreflex.h > b/arch/arm/mach-omap2/smartreflex.h > index 2a0e823..c4aca9d 100644 > --- a/arch/arm/mach-omap2/smartreflex.h > +++ b/arch/arm/mach-omap2/smartreflex.h > @@ -248,9 +248,13 @@ void disable_smartreflex(int srid); > int sr_voltagescale_vcbypass(u32 t_opp, u32 c_opp, u8 t_vsel, u8 c_vsel); > void sr_start_vddautocomap(int srid, u32 target_opp_no); > int sr_stop_vddautocomap(int srid); > +typedef int (*omap3_voltagescale_vcbypass_t)(u32 t_opp, u32 c_opp, > + u8 t_vsel, u8 c_vsel); > +void omap3_voltagescale_vcbypass_setup(omap3_voltagescale_vcbypass_t fun); > #else > static inline void enable_smartreflex(int srid) {} > static inline void disable_smartreflex(int srid) {} > +#define omap3_voltagescale_vcbypass_setup(fun) do {} while (0); > #endif > > #endif > diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig > index c8ba1e2..8d2c607 100644 > --- a/arch/arm/plat-omap/Kconfig > +++ b/arch/arm/plat-omap/Kconfig > @@ -68,7 +68,7 @@ config OMAP_DEBUG_CLOCKDOMAIN > > config OMAP_SMARTREFLEX > bool "SmartReflex support" > - depends on ARCH_OMAP34XX && TWL4030_CORE && PM > + depends on ARCH_OMAP34XX && PM > help > Say Y if you want to enable SmartReflex. > > -- > 1.5.4.3 > -- > To unsubscribe from this list: send the line "unsubscribe linux-omap" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html