[PATCH 2/2] spi: spi-ti-qspi: optimize byte-transfers

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Optimize the 8-bit based transfers, as used by the SPI flash
devices, by reading the data registers by 32 and 128 bits when
possible and copy the contents to the receive buffer.

The speed improvement is 4.9x using quad read.

Signed-off-by: Jean Pihet <jean.pihet@xxxxxxxxxxxxxx>
Cc: Ryan Barnett <ryan.barnett@xxxxxxxxxxxxxxxxxxx>
Cc: Conrad Ratschan <conrad.ratschan@xxxxxxxxxxxxxxxxxxx>
Cc: Arnout Vandecappelle <arnout.vandecappelle@xxxxxxxxxxxxx>
---
 drivers/spi/spi-ti-qspi.c | 54 ++++++++++++++++++++++++++++++++++++---
 1 file changed, 51 insertions(+), 3 deletions(-)

diff --git a/drivers/spi/spi-ti-qspi.c b/drivers/spi/spi-ti-qspi.c
index 0334e2926998..858fda8ac73e 100644
--- a/drivers/spi/spi-ti-qspi.c
+++ b/drivers/spi/spi-ti-qspi.c
@@ -314,6 +314,8 @@ static int qspi_read_msg(struct ti_qspi *qspi, struct spi_transfer *t,
 {
 	int wlen;
 	unsigned int cmd;
+	u32 rx;
+	u8 rxlen, rx_wlen;
 	u8 *rxbuf;
 
 	rxbuf = t->rx_buf;
@@ -336,14 +338,60 @@ static int qspi_read_msg(struct ti_qspi *qspi, struct spi_transfer *t,
 		if (qspi_is_busy(qspi))
 			return -EBUSY;
 
+		switch (wlen) {
+		case 1:
+			/*
+			 * Optimize the 8-bit words transfers, as used by
+			 * the SPI flash devices.
+			 */
+			if (count >= QSPI_WLEN_MAX_BYTES) {
+				rxlen = QSPI_WLEN_MAX_BYTES;
+			} else {
+				rxlen = min(count, 4);
+			}
+			rx_wlen = rxlen << 3;
+			cmd &= ~QSPI_WLEN_MASK;
+			cmd |= QSPI_WLEN(rx_wlen);
+			break;
+		default:
+			rxlen = wlen;
+			break;
+		}
+
 		ti_qspi_write(qspi, cmd, QSPI_SPI_CMD_REG);
 		if (ti_qspi_poll_wc(qspi)) {
 			dev_err(qspi->dev, "read timed out\n");
 			return -ETIMEDOUT;
 		}
+
 		switch (wlen) {
 		case 1:
-			*rxbuf = readb(qspi->base + QSPI_SPI_DATA_REG);
+			/*
+			 * Optimize the 8-bit words transfers, as used by
+			 * the SPI flash devices.
+			 */
+			if (count >= QSPI_WLEN_MAX_BYTES) {
+				u32 *rxp = (u32 *) rxbuf;
+				rx = readl(qspi->base + QSPI_SPI_DATA_REG_3);
+				*rxp++ = be32_to_cpu(rx);
+				rx = readl(qspi->base + QSPI_SPI_DATA_REG_2);
+				*rxp++ = be32_to_cpu(rx);
+				rx = readl(qspi->base + QSPI_SPI_DATA_REG_1);
+				*rxp++ = be32_to_cpu(rx);
+				rx = readl(qspi->base + QSPI_SPI_DATA_REG);
+				*rxp++ = be32_to_cpu(rx);
+			} else {
+				u8 *rxp = rxbuf;
+				rx = readl(qspi->base + QSPI_SPI_DATA_REG);
+				if (rx_wlen >= 8)
+					*rxp++ = rx >> (rx_wlen - 8);
+				if (rx_wlen >= 16)
+					*rxp++ = rx >> (rx_wlen - 16);
+				if (rx_wlen >= 24)
+					*rxp++ = rx >> (rx_wlen - 24);
+				if (rx_wlen >= 32)
+					*rxp++ = rx;
+			}
 			break;
 		case 2:
 			*((u16 *)rxbuf) = readw(qspi->base + QSPI_SPI_DATA_REG);
@@ -352,8 +400,8 @@ static int qspi_read_msg(struct ti_qspi *qspi, struct spi_transfer *t,
 			*((u32 *)rxbuf) = readl(qspi->base + QSPI_SPI_DATA_REG);
 			break;
 		}
-		rxbuf += wlen;
-		count -= wlen;
+		rxbuf += rxlen;
+		count -= rxlen;
 	}
 
 	return 0;
-- 
2.24.1




[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux