Re: [PATCH-next 01/20] gpio: gpio-omap: ensure irq is enabled before wakeup

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Jun 10, 2019 at 7:11 PM Grygorii Strashko
<grygorii.strashko@xxxxxx> wrote:

> From: Russell King <rmk+kernel@xxxxxxxxxxxxxxx>
>
> Documentation states:
>
>   NOTE: There must be a correlation between the wake-up enable and
>   interrupt-enable registers. If a GPIO pin has a wake-up configured
>   on it, it must also have the corresponding interrupt enabled (on
>   one of the two interrupt lines).
>
> Ensure that this condition is always satisfied by enabling the detection
> events after enabling the interrupt, and disabling the detection before
> disabling the interrupt.  This ensures interrupt/wakeup events can not
> happen until both the wakeup and interrupt enables correlate.
>
> If we do any clearing, clear between the interrupt enable/disable and
> trigger setting.
>
> Signed-off-by: Russell King <rmk+kernel@xxxxxxxxxxxxxxx>
> Signed-off-by: Grygorii Strashko <grygorii.strashko@xxxxxx>

Patch applied.

Yours,
Linus Walleij



[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux