V3: * add bindings documentation (suggested by sam@xxxxxxxxxxxx) V2 2019-06-05 07:07:05: * fix typo in 99dtc panel compatible string (reported by imirkin@xxxxxxxxxxxx) V1 2019-06-04 14:53:00: Since v5.2-rc1 OMAP is no longer using a special display driver architecture for DPI panels, but uses the general drm/panel/panel-simple. So we finally can add SoC independent panel definitions for two panel models which we already had worked on quite a while ago (before device tree was introduced): https://patchwork.kernel.org/patch/2851295/ H. Nikolaus Schaller (5): drm/panel: simple: Add Sharp LQ070Y3DG3B panel support drm/panel: simple: Add Ortustech COM37H3M panel support dt-bindings: drm/panel: simple: add ortustech,com37h3m05dtc panel dt-bindings: drm/panel: simple: add ortustech,com37h3m99dtc panel dt-bindings: drm/panel: simple: add sharp,lq070y3dg3b panel .../display/panel/ortustech,com37h3m05dtc.txt | 12 ++++ .../display/panel/ortustech,com37h3m99dtc.txt | 12 ++++ .../display/panel/sharp,lq070y3dg3b.txt | 12 ++++ drivers/gpu/drm/panel/panel-simple.c | 63 +++++++++++++++++++ 4 files changed, 99 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/panel/ortustech,com37h3m05dtc.txt create mode 100644 Documentation/devicetree/bindings/display/panel/ortustech,com37h3m99dtc.txt create mode 100644 Documentation/devicetree/bindings/display/panel/sharp,lq070y3dg3b.txt -- 2.19.1
