The change adds support for the Ortustech COM37H3M05DTC/99DTC 3.7" TFT LCD panel. Signed-off-by: H. Nikolaus Schaller <hns@xxxxxxxxxxxxx> --- drivers/gpu/drm/panel/panel-simple.c | 33 ++++++++++++++++++++++++++++ 1 file changed, 33 insertions(+) diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c index 5b27829c5a78..1892d00be16d 100644 --- a/drivers/gpu/drm/panel/panel-simple.c +++ b/drivers/gpu/drm/panel/panel-simple.c @@ -2007,6 +2007,33 @@ static const struct panel_desc ontat_yx700wv03 = { .bus_format = MEDIA_BUS_FMT_RGB666_1X18, }; +static const struct drm_display_mode ortustech_com37h3m_mode = { + .clock = 22153, + .hdisplay = 480, + .hsync_start = 480 + 8, + .hsync_end = 480 + 8 + 10, + .htotal = 480 + 8 + 10 + 10, + .vdisplay = 640, + .vsync_start = 640 + 4, + .vsync_end = 640 + 4 + 3, + .vtotal = 640 + 4 + 3 + 4, + .vrefresh = 60, + .flags = DRM_MODE_FLAG_NVSYNC | DRM_MODE_FLAG_NHSYNC, +}; + +static const struct panel_desc ortustech_com37h3m = { + .modes = &ortustech_com37h3m_mode, + .num_modes = 1, + .bpc = 8, + .size = { + .width = 56, /* 56.16mm */ + .height = 75, /* 74.88mm */ + }, + .bus_format = MEDIA_BUS_FMT_RGB888_1X24, + .bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_POSEDGE | + DRM_BUS_FLAG_SYNC_DRIVE_POSEDGE, +}; + static const struct drm_display_mode ortustech_com43h4m85ulc_mode = { .clock = 25000, .hdisplay = 480, @@ -2786,6 +2813,12 @@ static const struct of_device_id platform_of_match[] = { }, { .compatible = "ontat,yx700wv03", .data = &ontat_yx700wv03, + }, { + .compatible = "ortustech,com37h3m05dtc", + .data = &ortustech_com37h3m, + }, { + .compatible = "ortustech,com37h3m099dtc", + .data = &ortustech_com37h3m, }, { .compatible = "ortustech,com43h4m85ulc", .data = &ortustech_com43h4m85ulc, -- 2.19.1