On Fri, Apr 12, 2019 at 02:20:06PM +0530, Kishon Vijay Abraham I wrote:
> Hi Lorenzo,
>
> On 11/04/19 8:33 PM, Lorenzo Pieralisi wrote:
> > On Mon, Mar 25, 2019 at 03:09:33PM +0530, Kishon Vijay Abraham I wrote:
> >> hook_fault_code is an ARM32 specific API for hooking into data abort.
> >> Since pci-keystone.c will be used for AM65X platforms which is an
> >> ARM64 platform,
> >
> > Hi Kishon,
> >
> > How is the problem plugged by the fault hook fixed on ARM64 ?
>
> At least in AM654 platform, I don't see a bus error when PCIe device
> is not connected but returns 0xffffffff. So there is no necessary for
> hook_fault_code in AM654 platform.
That can't have much to do with ARM32<->ARM64, it is rather a platform
integration issue AFAICS. Russell has a point, this has to be documented
I can do it for you but I need additional information.
Thanks,
Lorenzo
> Thanks
> Kishon
>
> >
> > Thanks,
> > Lorenzo
> >
> >> allow hook_fault_code to be compiled only for ARM32.
> >>
> >> Signed-off-by: Kishon Vijay Abraham I <kishon@xxxxxx>
> >> ---
> >> drivers/pci/controller/dwc/pci-keystone.c | 4 ++++
> >> 1 file changed, 4 insertions(+)
> >>
> >> diff --git a/drivers/pci/controller/dwc/pci-keystone.c b/drivers/pci/controller/dwc/pci-keystone.c
> >> index dfe54553d832..93296d434f40 100644
> >> --- a/drivers/pci/controller/dwc/pci-keystone.c
> >> +++ b/drivers/pci/controller/dwc/pci-keystone.c
> >> @@ -710,6 +710,7 @@ static int ks_pcie_config_legacy_irq(struct keystone_pcie *ks_pcie)
> >> return ret;
> >> }
> >>
> >> +#ifdef CONFIG_ARM
> >> /*
> >> * When a PCI device does not exist during config cycles, keystone host gets a
> >> * bus error instead of returning 0xffffffff. This handler always returns 0
> >> @@ -729,6 +730,7 @@ static int ks_pcie_fault(unsigned long addr, unsigned int fsr,
> >>
> >> return 0;
> >> }
> >> +#endif
> >>
> >> static int __init ks_pcie_init_id(struct keystone_pcie *ks_pcie)
> >> {
> >> @@ -778,12 +780,14 @@ static int __init ks_pcie_host_init(struct pcie_port *pp)
> >> if (ret < 0)
> >> return ret;
> >>
> >> +#ifdef CONFIG_ARM
> >> /*
> >> * PCIe access errors that result into OCP errors are caught by ARM as
> >> * "External aborts"
> >> */
> >> hook_fault_code(17, ks_pcie_fault, SIGBUS, 0,
> >> "Asynchronous external abort");
> >> +#endif
> >>
> >> ks_pcie_start_link(pci);
> >> dw_pcie_wait_for_link(pci);
> >> --
> >> 2.17.1
> >>
