The PRUSS module has a SYSCFG which is unique. Add support for it. Signed-off-by: Roger Quadros <rogerq@xxxxxx> --- Documentation/devicetree/bindings/bus/ti-sysc.txt | 1 + include/dt-bindings/bus/ti-sysc.h | 11 +++++++++++ 2 files changed, 12 insertions(+) diff --git a/Documentation/devicetree/bindings/bus/ti-sysc.txt b/Documentation/devicetree/bindings/bus/ti-sysc.txt index 85a23f5..fe1dfb1 100644 --- a/Documentation/devicetree/bindings/bus/ti-sysc.txt +++ b/Documentation/devicetree/bindings/bus/ti-sysc.txt @@ -38,6 +38,7 @@ Required standard properties: "ti,sysc-dra7-mcasp" "ti,sysc-usb-host-fs" "ti,sysc-dra7-mcan" + "ti,sysc-pruss" - reg shall have register areas implemented for the interconnect target module in question such as revision, sysc and syss diff --git a/include/dt-bindings/bus/ti-sysc.h b/include/dt-bindings/bus/ti-sysc.h index 7138384..8ec78e8 100644 --- a/include/dt-bindings/bus/ti-sysc.h +++ b/include/dt-bindings/bus/ti-sysc.h @@ -17,6 +17,17 @@ #define SYSC_DRA7_MCAN_ENAWAKEUP (1 << 4) +/* SYSCONFIG specific to PRUSS */ +#define SYSC_PRUSS_SUB_MWAIT (1 << 5) +#define SYSC_PRUSS_STANDBY_INIT (1 << 4) + +#define SYSC_PRUSS_STANDBY_FORCE (0 << 2) +#define SYSC_PRUSS_STANDBY_NO (1 << 2) +#define SYSC_PRUSS_STANDBY_SMART (2 << 2) +#define SYSC_PRUSS_STANDBY_MASK (3 << 2) + +#define SYSC_PRUSS_IDLE_MASK 3 + /* SYSCONFIG STANDBYMODE/MIDLEMODE/SIDLEMODE supported by hardware */ #define SYSC_IDLE_FORCE 0 #define SYSC_IDLE_NO 1 -- Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
