The GTA04 has a w2sg0004 or w2sg0084 gps chip. Not detectable which one is mounted so use the compatibility entry for w2sg0004 for all which will work for both. Signed-off-by: Andreas Kemnade <andreas@xxxxxxxxxxxx> --- Changes in v2: - some s/gps/gnss/ - not added vcc-supply because the regulator is not modelled in dts at all w2sg0004 bindings are in next-20190129 https://git.kernel.org/pub/scm/linux/kernel/git/johan/gnss gnss-next arch/arm/boot/dts/omap3-gta04.dtsi | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi index e53d32691308..d58c117e429f 100644 --- a/arch/arm/boot/dts/omap3-gta04.dtsi +++ b/arch/arm/boot/dts/omap3-gta04.dtsi @@ -312,6 +312,12 @@ >; }; + gps_pins: pinmux_gps_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* gpio145 */ + >; + }; + hdq_pins: hdq_pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x21c6, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda.hdq */ @@ -644,6 +650,13 @@ &uart2 { pinctrl-names = "default"; pinctrl-0 = <&uart2_pins>; + gnss: gnss { + compatible = "wi2wi,w2sg0004"; + pinctrl-names = "default"; + pinctrl-0 = <&gps_pins>; + sirf,onoff-gpios = <&gpio5 17 GPIO_ACTIVE_HIGH>; + lna-supply = <&vsim>; + }; }; &uart3 { -- 2.11.0
