Ulf Hansson <ulf.hansson@xxxxxxxxxx> writes:
> On Wed, 16 Jan 2019 at 16:43, Tony Lindgren <tony@xxxxxxxxxxx> wrote:
>>
>> * Ulf Hansson <ulf.hansson@xxxxxxxxxx> [190116 11:37]:
>> > During "wlan-up", we are programming the FW into the WiFi-chip. However,
>> > re-programming the FW doesn't work, unless a power cycle of the WiFi-chip
>> > is made in-between the programmings.
>> >
>> > To conform to this requirement and to fix the regression in a simple way,
>> > let's start by allowing that the SDIO card (WiFi-chip) may stay powered on
>> > (runtime resumed) when wl12xx_sdio_power_off() returns. The intent with the
>> > current code is to treat this scenario as an error, but unfortunate this
>> > doesn't work as expected, so let's fix this.
>> >
>> > The other part is to guarantee that a power cycle of the SDIO card has been
>> > completed when wl12xx_sdio_power_on() returns, as to allow the FW
>> > programming to succeed. However, relying solely on runtime PM to deal with
>> > this isn't sufficient. For example, userspace may prevent runtime suspend
>> > via sysfs for the device that represents the SDIO card, leading to that the
>> > mmc core also keeps it powered on. For this reason, let's instead do a
>> > brute force power cycle in wl12xx_sdio_power_on().
>> >
>> > Fixes: 728a9dc61f13 ("wlcore: sdio: Fix flakey SDIO runtime PM handling")
>> > Signed-off-by: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
>> > ---
>> >
>> > Changes in v2:
>> > - Keep the SDIO host claimed when calling mmc_hw_reset().
>> > - Add a fixes tag.
>>
>> This v2 version works for me as tested with:
>>
>> # while [ 1 ]; do ifconfig wlan0 down; ifconfig wlan0 up; done
>> [ 181.364990] wlcore: down
>> [ 182.116424] wlcore: firmware booted (Rev 6.3.10.0.141)
>> [ 182.151641] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>> [ 182.166778] wlcore: down
>> [ 182.773132] wlcore: firmware booted (Rev 6.3.10.0.141)
>> [ 182.811096] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>> ...
>>
>> Thanks for fixing this issue properly, and feel free to add:
>>
>> Tested-by: Tony Lindgren <tony@xxxxxxxxxxx>
>
> Thanks for testing, great news!
>
> Before queuing this as fix, let's also see what the Hikey folkz thinks
> of this. I have pinged Anders and he is currently running a test
> suite.
>
> Kalle, can you please tag this for stable as well?
Ok, I'll queue this for 5.0 (but wait for testing feedback at least a
day) and add:
Cc: <stable@xxxxxxxxxxxxxxx>
--
Kalle Valo
