[PATCH 1/4] clk: ti: move clk_hw_omap list handling under generic part of the driver

[Tero Kristo <t-kristo@xxxxxx>]

Currently the clk_hw_omap list is handled under the autoidle code, but
it should be accessible generically. Add a few APIs towards this, and
update the autoidle code to use the generic implementations.

Signed-off-by: Tero Kristo <t-kristo@xxxxxx>
---
 drivers/clk/ti/autoidle.c | 65 +++++++++++++++++++----------------------------
 drivers/clk/ti/clk.c      | 42 ++++++++++++++++++++++++++++++
 drivers/clk/ti/clock.h    |  1 +
 3 files changed, 69 insertions(+), 39 deletions(-)

diff --git a/drivers/clk/ti/autoidle.c b/drivers/clk/ti/autoidle.c
index 7bb9afb..a129b4b 100644
--- a/drivers/clk/ti/autoidle.c
+++ b/drivers/clk/ti/autoidle.c
@@ -35,7 +35,20 @@ struct clk_ti_autoidle {
 #define AUTOIDLE_LOW		0x1
 
 static LIST_HEAD(autoidle_clks);
-static LIST_HEAD(clk_hw_omap_clocks);
+
+static int _omap2_clk_deny_idle(struct clk_hw_omap *clk)
+{
+	if (clk->ops && clk->ops->deny_idle)
+		clk->ops->deny_idle(clk);
+	return 0;
+}
+
+static int _omap2_clk_allow_idle(struct clk_hw_omap *clk)
+{
+	if (clk->ops && clk->ops->allow_idle)
+		clk->ops->allow_idle(clk);
+	return 0;
+}
 
 /**
  * omap2_clk_deny_idle - disable autoidle on an OMAP clock
@@ -45,12 +58,9 @@ struct clk_ti_autoidle {
  */
 int omap2_clk_deny_idle(struct clk *clk)
 {
-	struct clk_hw_omap *c;
+	struct clk_hw_omap *c = to_clk_hw_omap(__clk_get_hw(clk));
 
-	c = to_clk_hw_omap(__clk_get_hw(clk));
-	if (c->ops && c->ops->deny_idle)
-		c->ops->deny_idle(c);
-	return 0;
+	return _omap2_clk_deny_idle(c);
 }
 
 /**
@@ -61,12 +71,9 @@ int omap2_clk_deny_idle(struct clk *clk)
  */
 int omap2_clk_allow_idle(struct clk *clk)
 {
-	struct clk_hw_omap *c;
+	struct clk_hw_omap *c = to_clk_hw_omap(__clk_get_hw(clk));
 
-	c = to_clk_hw_omap(__clk_get_hw(clk));
-	if (c->ops && c->ops->allow_idle)
-		c->ops->allow_idle(c);
-	return 0;
+	return _omap2_clk_allow_idle(c);
 }
 
 static void _allow_autoidle(struct clk_ti_autoidle *clk)
@@ -168,26 +175,6 @@ int __init of_ti_clk_autoidle_setup(struct device_node *node)
 }
 
 /**
- * omap2_init_clk_hw_omap_clocks - initialize an OMAP clock
- * @hw: struct clk_hw * to initialize
- *
- * Add an OMAP clock @clk to the internal list of OMAP clocks.  Used
- * temporarily for autoidle handling, until this support can be
- * integrated into the common clock framework code in some way.  No
- * return value.
- */
-void omap2_init_clk_hw_omap_clocks(struct clk_hw *hw)
-{
-	struct clk_hw_omap *c;
-
-	if (clk_hw_get_flags(hw) & CLK_IS_BASIC)
-		return;
-
-	c = to_clk_hw_omap(hw);
-	list_add(&c->node, &clk_hw_omap_clocks);
-}
-
-/**
  * omap2_clk_enable_autoidle_all - enable autoidle on all OMAP clocks that
  * support it
  *
@@ -198,11 +185,11 @@ void omap2_init_clk_hw_omap_clocks(struct clk_hw *hw)
  */
 int omap2_clk_enable_autoidle_all(void)
 {
-	struct clk_hw_omap *c;
+	int ret;
 
-	list_for_each_entry(c, &clk_hw_omap_clocks, node)
-		if (c->ops && c->ops->allow_idle)
-			c->ops->allow_idle(c);
+	ret = omap2_clk_for_each(_omap2_clk_allow_idle);
+	if (ret)
+		return ret;
 
 	_clk_generic_allow_autoidle_all();
 
@@ -220,11 +207,11 @@ int omap2_clk_enable_autoidle_all(void)
  */
 int omap2_clk_disable_autoidle_all(void)
 {
-	struct clk_hw_omap *c;
+	int ret;
 
-	list_for_each_entry(c, &clk_hw_omap_clocks, node)
-		if (c->ops && c->ops->deny_idle)
-			c->ops->deny_idle(c);
+	ret = omap2_clk_for_each(_omap2_clk_deny_idle);
+	if (ret)
+		return ret;
 
 	_clk_generic_deny_autoidle_all();
 
diff --git a/drivers/clk/ti/clk.c b/drivers/clk/ti/clk.c
index d0cd585..8172843 100644
--- a/drivers/clk/ti/clk.c
+++ b/drivers/clk/ti/clk.c
@@ -31,6 +31,7 @@
 #undef pr_fmt
 #define pr_fmt(fmt) "%s: " fmt, __func__
 
+static LIST_HEAD(clk_hw_omap_clocks);
 struct ti_clk_ll_ops *ti_clk_ll_ops;
 static struct device_node *clocks_node_ptr[CLK_MAX_MEMMAPS];
 
@@ -517,3 +518,44 @@ struct clk *ti_clk_register(struct device *dev, struct clk_hw *hw,
 
 	return clk;
 }
+
+/**
+ * omap2_init_clk_hw_omap_clocks - initialize an OMAP clock
+ * @hw: struct clk_hw * to initialize
+ *
+ * Add an OMAP clock @clk to the internal list of OMAP clocks.  Used
+ * temporarily for autoidle handling, until this support can be
+ * integrated into the common clock framework code in some way.  No
+ * return value.
+ */
+void omap2_init_clk_hw_omap_clocks(struct clk_hw *hw)
+{
+	struct clk_hw_omap *c;
+
+	c = to_clk_hw_omap(hw);
+	list_add(&c->node, &clk_hw_omap_clocks);
+}
+
+/**
+ * omap2_clk_for_each - call function for each registered clk_hw_omap
+ * @fn: pointer to a callback function
+ *
+ * Call @fn for each registered clk_hw_omap, passing @hw to each
+ * function.  @fn must return 0 for success or any other value for
+ * failure.  If @fn returns non-zero, the iteration across clocks
+ * will stop and the non-zero return value will be passed to the
+ * caller of omap2_clk_for_each().
+ */
+int omap2_clk_for_each(int (*fn)(struct clk_hw_omap *hw))
+{
+	int ret;
+	struct clk_hw_omap *hw;
+
+	list_for_each_entry(hw, &clk_hw_omap_clocks, node) {
+		ret = (*fn)(hw);
+		if (ret)
+			break;
+	}
+
+	return ret;
+}
diff --git a/drivers/clk/ti/clock.h b/drivers/clk/ti/clock.h
index 9f312a2..e5b8af3 100644
--- a/drivers/clk/ti/clock.h
+++ b/drivers/clk/ti/clock.h
@@ -301,6 +301,7 @@ long omap4_dpll_regm4xen_round_rate(struct clk_hw *hw,
 				    unsigned long *parent_rate);
 int omap4_dpll_regm4xen_determine_rate(struct clk_hw *hw,
 				       struct clk_rate_request *req);
+int omap2_clk_for_each(int (*fn)(struct clk_hw_omap *hw));
 
 extern struct ti_clk_ll_ops *ti_clk_ll_ops;
 
-- 
1.9.1

--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki