[PATCH 3/3] serial: 8250_omap: Use clk_get_rate() to obtain fclk frequency

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



8250_omap driver uses clock-frequency DT property to obtain functional
clk frequency. This is not ideal as users need to calculate functional
clk frequency offline and populate it in DT.
Therefore add support to obtain functional clock frequency using clk
APIs when clock-frequency DT property is not defined.

Suggested-by: Lokesh Vutla <lokeshvutla@xxxxxx>
Signed-off-by: Vignesh R <vigneshr@xxxxxx>
---
 drivers/tty/serial/8250/8250_omap.c | 14 +++++++++++++-
 1 file changed, 13 insertions(+), 1 deletion(-)

diff --git a/drivers/tty/serial/8250/8250_omap.c b/drivers/tty/serial/8250/8250_omap.c
index a74126569785..0a8316632d75 100644
--- a/drivers/tty/serial/8250/8250_omap.c
+++ b/drivers/tty/serial/8250/8250_omap.c
@@ -12,6 +12,7 @@
 #define SUPPORT_SYSRQ
 #endif
 
+#include <linux/clk.h>
 #include <linux/device.h>
 #include <linux/io.h>
 #include <linux/module.h>
@@ -1203,7 +1204,18 @@ static int omap8250_probe(struct platform_device *pdev)
 	}
 	up.port.line = ret;
 
-	of_property_read_u32(np, "clock-frequency", &up.port.uartclk);
+	if (of_property_read_u32(np, "clock-frequency", &up.port.uartclk)) {
+		struct clk *clk;
+
+		clk = devm_clk_get(&pdev->dev, NULL);
+		if (IS_ERR(clk)) {
+			if (PTR_ERR(clk) == -EPROBE_DEFER)
+				return -EPROBE_DEFER;
+		} else {
+			up.port.uartclk = clk_get_rate(clk);
+		}
+	}
+
 	priv->wakeirq = irq_of_parse_and_map(np, 1);
 
 	id = of_match_device(of_match_ptr(omap8250_dt_ids), &pdev->dev);
-- 
2.20.1




[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux