Hi,
On Thu, Dec 13, 2018 at 03:04:11PM -0800, Tony Lindgren wrote:
> With wlcore supporting optional wakeirqs, we can configure it
> for pandaboard.
-ENOPANDA
-- Sebastian
> This makes ssh connection usable with the SoC
> entering deeper idle states.
>
> Let's configure a wakeirq both for the wlcore GPIO and the SDIO
> dat1 pin in case wlcore starts supporting SDIO dat1 interrupt at
> some point.
>
> And let's also add the missing keep-power-in-suspend while at it.
>
> Signed-off-by: Tony Lindgren <tony@xxxxxxxxxxx>
> ---
> arch/arm/boot/dts/omap4-droid4-xt894.dts | 10 +++++++---
> 1 file changed, 7 insertions(+), 3 deletions(-)
>
> diff --git a/arch/arm/boot/dts/omap4-droid4-xt894.dts b/arch/arm/boot/dts/omap4-droid4-xt894.dts
> --- a/arch/arm/boot/dts/omap4-droid4-xt894.dts
> +++ b/arch/arm/boot/dts/omap4-droid4-xt894.dts
> @@ -359,20 +359,24 @@
>
> &mmc3 {
> vmmc-supply = <&wl12xx_vmmc>;
> + /* uart2_tx.sdmmc3_dat1 pad as wakeirq */
> interrupts-extended = <&wakeupgen GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH
> &omap4_pmx_core 0xde>;
> -
> + interrupt-names = "irq", "wakeup";
> non-removable;
> bus-width = <4>;
> cap-power-off-card;
> + keep-power-in-suspend;
>
> #address-cells = <1>;
> #size-cells = <0>;
> wlcore: wlcore@2 {
> compatible = "ti,wl1285", "ti,wl1283";
> reg = <2>;
> - interrupt-parent = <&gpio4>;
> - interrupts = <4 IRQ_TYPE_EDGE_RISING>; /* gpio100 */
> + /* gpio_100 with gpmc_wait2 pad as wakeirq */
> + interrupts-extended = <&gpio4 4 IRQ_TYPE_EDGE_RISING>,
> + <&omap4_pmx_core 0x4e>;
> + interrupt-names = "irq", "wakeup";
> ref-clock-frequency = <26000000>;
> tcxo-clock-frequency = <26000000>;
> };
> --
> 2.19.2
Attachment:
signature.asc
Description: PGP signature
