* Peter Ujfalusi <peter.ujfalusi@xxxxxx> [181212 08:00]: > > > On 08/12/2018 2.54, Tony Lindgren wrote: > > We need to add mcasp l3 port ranges for mcasp to use a correct l3 > > data port address for dma. And we're also missing the optional clocks > > that we have tagged with HWMOD_OPT_CLKS_NEEDED in omap_hwmod_7xx_data.c. > > > > Note that for reading the module revision register HWMOD_OPT_CLKS_NEEDED > > do not seem to be needed. So they could be probably directly managed > > only by the mcasp driver, and then we could leave them out for the > > interconnect target module. > > Tested on dra7-evm and dra72-evm. Works nicely, thanks! > > Tested-by: Peter Ujfalusi <peter.ujfalusi@xxxxxx> OK good to hear and thanks for testing. I already pushed this one out yesterday as I was able to test it myself on beagle-x15. Regards, Tony
