On 10/24/18 3:02 AM, Yegor Yefremov wrote:
On Tue, Oct 23, 2018 at 3:31 PM Falco Hyfing <hyfinglists@xxxxxxxxx> wrote:
Hi there,
I do not get bridging to work. Both buildroot and OpenWrt with 4.9 &
4.14 fail somehow.
Legacy:
# brctl addbr br0
# brctl addif br0 eth0
[2869969.253272] br0: port 1(eth0) entered blocking state
[2869969.258901] br0: port 1(eth0) entered disabled state
[2869969.265663] cpsw 4a100000.ethernet eth0: failed to initialize
vlan filtering on this port
[2869969.399238] br0: port 1(eth0) entered blocking state
[2869969.404667] br0: port 1(eth0) entered disabled state
[2869969.411479] cpsw 4a100000.ethernet eth0: failed to initialize
vlan filtering on this port
can't add eth0 to bridge br0: Invalid argument
Current method:
# ip link add br0 type bridge
# ip link set eth0 master br0
[2870168.133408] br0: port 1(eth0) entered blocking state
[2870168.139033] br0: port 1(eth0) entered disabled state
[2870168.145795] cpsw 4a100000.ethernet eth0: failed to initialize
vlan filtering on this port
RTNETLINK answers: Invalid argument
# uname -a
Linux host 4.9.119 #0 SMP Mon Aug 13 06:36:18 2018 armv7l GNU/Linux
This is a vanilla kernel on OpenWRT 18.06 .
Do you have any suggestions or hints?
Adding Ivan and Grygorii to the thread.
The issue persists in at least 4.18.x too. The system in use is OnRISC
Baltos. Its DTS was long ago upstreamed [1], [2].
[1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/arch/arm/boot/dts/am335x-baltos-ir5221.dts
[2] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/arch/arm/boot/dts/am335x-baltos.dtsi
I assume those HW configured in dual_mac mode. Right?
In dual_mac mode vid1 and vid2 are reserved, so if bridge is configured
in vlan aware mode it will try to register default bridge vlan which is vid1
and -- fail.
Pls, check bridge properties:
/sys/class/net/br0/bridge/default_pvid
/sys/class/net/br0/bridge/vlan_filtering
--
regards,
-grygorii
