Re: [RFC PATCH 4/4] i2c: core: introduce master_xfer_irqless callback

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Sep 20, 2018 at 06:14:23PM +0200, Wolfram Sang wrote:
> We had the request to access devices very late when interrupts are not
> available anymore multiple times now. Mostly to prepare shutdown or
> reboot. Allow adapters to specify a specific callback for this case.
> Note that we fall back to the generic master_xfer callback if this new
> irqless one is not present. This is intentional to preserve the previous
> behaviour and avoid regressions. Because there are drivers not using
> interrupts or because it might have worked "accidently" before.

It's not really about "irqless", it's about being in atomic context.
irqless makes it sound like you may sleep, but the reality is sleeping
is also out (the scheduler needs IRQs to do it's job.)

So, it may be tempting to use things like msleep() in "irqless" but
that's not permissable.  So surely "atomic" would be a better name for
this?

Also, how does this get around the issue which I pointed out with (eg)
an oops occuring, which leads to a panic followed by an attempt to
reboot if the I2C bus in question is already mid-transaction?  Won't
we deadlock?

> 
> Signed-off-by: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
> ---
>  drivers/i2c/i2c-core-base.c |  6 +++++-
>  include/linux/i2c.h         | 10 +++++++---
>  2 files changed, 12 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/i2c/i2c-core-base.c b/drivers/i2c/i2c-core-base.c
> index 904b4d2ebefa..f827446c3089 100644
> --- a/drivers/i2c/i2c-core-base.c
> +++ b/drivers/i2c/i2c-core-base.c
> @@ -1887,7 +1887,11 @@ int __i2c_transfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
>  	/* Retry automatically on arbitration loss */
>  	orig_jiffies = jiffies;
>  	for (ret = 0, try = 0; try <= adap->retries; try++) {
> -		ret = adap->algo->master_xfer(adap, msgs, num);
> +		if ((in_atomic() || irqs_disabled()) && adap->algo->master_xfer_irqless)
> +			ret = adap->algo->master_xfer_irqless(adap, msgs, num);
> +		else
> +			ret = adap->algo->master_xfer(adap, msgs, num);
> +
>  		if (ret != -EAGAIN)
>  			break;
>  		if (time_after(jiffies, orig_jiffies + adap->timeout))
> diff --git a/include/linux/i2c.h b/include/linux/i2c.h
> index 65b4eaed1d96..11e615123bd0 100644
> --- a/include/linux/i2c.h
> +++ b/include/linux/i2c.h
> @@ -498,6 +498,8 @@ i2c_register_board_info(int busnum, struct i2c_board_info const *info,
>   * @master_xfer: Issue a set of i2c transactions to the given I2C adapter
>   *   defined by the msgs array, with num messages available to transfer via
>   *   the adapter specified by adap.
> + * @master_xfer_irqless: same as master_xfer. Yet, not using any interrupts
> + *   so e.g. PMICs can be accessed very late before shutdown
>   * @smbus_xfer: Issue smbus transactions to the given I2C adapter. If this
>   *   is not present, then the bus layer will try and convert the SMBus calls
>   *   into I2C transfers instead.
> @@ -511,9 +513,9 @@ i2c_register_board_info(int busnum, struct i2c_board_info const *info,
>   * be addressed using the same bus algorithms - i.e. bit-banging or the PCF8584
>   * to name two of the most common.
>   *
> - * The return codes from the @master_xfer field should indicate the type of
> - * error code that occurred during the transfer, as documented in the kernel
> - * Documentation file Documentation/i2c/fault-codes.
> + * The return codes from the @master_xfer{_irqless} field should indicate the
> + * type of error code that occurred during the transfer, as documented in the
> + * Kernel Documentation file Documentation/i2c/fault-codes.
>   */
>  struct i2c_algorithm {
>  	/* If an adapter algorithm can't do I2C-level access, set master_xfer
> @@ -524,6 +526,8 @@ struct i2c_algorithm {
>  	   processed, or a negative value on error */
>  	int (*master_xfer)(struct i2c_adapter *adap, struct i2c_msg *msgs,
>  			   int num);
> +	int (*master_xfer_irqless)(struct i2c_adapter *adap,
> +				   struct i2c_msg *msgs, int num);
>  	int (*smbus_xfer) (struct i2c_adapter *adap, u16 addr,
>  			   unsigned short flags, char read_write,
>  			   u8 command, int size, union i2c_smbus_data *data);
> -- 
> 2.18.0
> 
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

-- 
RMK's Patch system: http://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line in suburbia: sync at 12.1Mbps down 622kbps up
According to speedtest.net: 11.9Mbps down 500kbps up



[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux