Hi Janusz,
On 2018-10-12 21:09, Janusz Krzysztofik wrote:
> Commit b9762bebc633 ("gpiolib: Pass bitmaps, not integer arrays, to
> get/set array") changed the way GPIO values are passed to
> gpiod_get/set_array_value() and friends. The new code introduced into
> mmc_pwrseq_simple_set_gpios_value() incorrectly interpretes the 'value'
> argument as a bitmap of GPIO values and assigns it directly to the
> 'values' bitmap variable passed to gpiod_set_array_value_cansleep()
> instead of filling that bitmap with bits equal to the 'value' argument.
> As a result, only member 0 of the array is handled correctly.
>
> Moreover, wrong assumption is taken about the 'values' bitmap size not
> exceding the number of bits of the 'value' argument type.
>
> Fix it.
>
> Signed-off-by: Janusz Krzysztofik <jmkrzyszt@xxxxxxxxx>
> ---
> Hi,
>
> I think that patch has been missed while we were resolving issues
> related to GPIO fast bitmap processing. Since all issues other than the
> one addreessed by this patch have been been hopefully identified and
> fixed, GPIO tree seems now to be in good shape in regard to that.
> However, I believe pwrseq_simple is still broken. Hence, I'm
> resubmitting this patch to Ulf for inclusion in MMC tree, Cc: many other
> people who are kindly requested to test it if possible.
>
> I've identified the following DT files representing devices which may be
> affected (have more than one GPIO assigned to pwrseq_simple):
> - arch/arm/boot/dts/imx6qdl-sr-som-brcm.dtsi
> - arch/arm/boot/dts/exynos5250-snow-common.dtsi
On Samsung Snow Chromebook it doesn't change anything. Board boots and
detects WiFi SDIO card before and after applying it on top on Linux
next-20181012.
Tested-by: Marek Szyprowski <m.szyprowski
> - arch/arm/boot/dts/imx6sl-warp.dts
> - arch/arm/boot/dts/omap3-igep0030.dts
> - arch/arm/boot/dts/omap3-igep0020.dts
> - arch/arm/boot/dts/rk3036-kylin.dts
> - arch/arm64/boot/dts/rockchip/rk3368-r88.dts
> - arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
>
> Please start with checking if pwrseq_simple from linux-next works for
> you and if not, please test if this patch fixes the issue.
>
> Thanks,
> Janusz
>
>
> drivers/mmc/core/pwrseq_simple.c | 13 +++++++++++--
> 1 file changed, 11 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/mmc/core/pwrseq_simple.c b/drivers/mmc/core/pwrseq_simple.c
> index 7f882a2bb872..ece34c734693 100644
> --- a/drivers/mmc/core/pwrseq_simple.c
> +++ b/drivers/mmc/core/pwrseq_simple.c
> @@ -40,13 +40,22 @@ static void mmc_pwrseq_simple_set_gpios_value(struct mmc_pwrseq_simple *pwrseq,
> struct gpio_descs *reset_gpios = pwrseq->reset_gpios;
>
> if (!IS_ERR(reset_gpios)) {
> - DECLARE_BITMAP(values, BITS_PER_TYPE(value));
> + unsigned long *values;
> int nvalues = reset_gpios->ndescs;
>
> - values[0] = value;
> + values = bitmap_alloc(nvalues, GFP_KERNEL);
> + if (!values)
> + return;
> +
> + if (value)
> + bitmap_fill(values, nvalues);
> + else
> + bitmap_zero(values, nvalues);
>
> gpiod_set_array_value_cansleep(nvalues, reset_gpios->desc,
> reset_gpios->info, values);
> +
> + kfree(values);
> }
> }
>
Best regards
--
Marek Szyprowski, PhD
Samsung R&D Institute Poland
