Hi,
On Thursday 11 October 2018 07:12 PM, Ricardo Ribalda Delgado wrote:
> Hi Vignesh
>
> Ups, it does not look too good :S . Can you check if this change fixes it:
>
Below diff works for me. I no longer see crash and gpio-hog seems to be
working. Thanks!
Regards
Vignesh
> diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
> index e016b22658ff..bcd0ef49ce97 100644
> --- a/drivers/gpio/gpiolib.c
> +++ b/drivers/gpio/gpiolib.c
> @@ -1349,6 +1349,9 @@ int gpiochip_add_data_with_key(struct gpio_chip
> *chip, void *data,
>
> spin_unlock_irqrestore(&gpio_lock, flags);
>
> + for (i = 0; i < chip->ngpio; i++)
> + gdev->descs[i].gdev = gdev;
> +
> #ifdef CONFIG_PINCTRL
> INIT_LIST_HEAD(&gdev->pin_ranges);
> #endif
> @@ -1380,8 +1383,6 @@ int gpiochip_add_data_with_key(struct gpio_chip
> *chip, void *data,
> for (i = 0; i < chip->ngpio; i++) {
> struct gpio_desc *desc = &gdev->descs[i];
>
> - desc->gdev = gdev;
> -
> if (chip->get_direction && gpiochip_line_is_valid(chip, i))
> desc->flags = !chip->get_direction(chip, i) ?
> (1 << FLAG_IS_OUT) : 0;
>
>
> Thanks!
> On Thu, Oct 11, 2018 at 2:18 PM Vignesh R <vigneshr@xxxxxx> wrote:
>>
>> Hi,
>>
>> On Friday 05 October 2018 12:23 PM, Ricardo Ribalda Delgado wrote:
>>> Current code assumes that the direction is input if direction_input
>>> function is set.
>>> This might not be the case on GPIOs with programmable direction.
>>>
>>> Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@xxxxxxxxx>
>>> Tested-by: Jeffrey Hugo <jhugo@xxxxxxxxxxxxxx>
>>
>> This patch causes oops on TI's AM335x-ICEv2 board on next-20181011:
>>
>> [ 0.563797] OMAP GPIO hardware version 0.1
>> [ 0.577589] Unable to handle kernel NULL pointer dereference at virtual address 000002b8
>> [ 0.586127] pgd = (ptrval)
>> [ 0.588934] [000002b8] *pgd=00000000
>> [ 0.592732] Internal error: Oops: 5 [#1] SMP ARM
>> [ 0.597499] Modules linked in:
>> [ 0.600668] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.19.0-rc7-next-20181011 #70
>> [ 0.608466] Hardware name: Generic AM33XX (Flattened Device Tree)
>> [ 0.614770] PC is at gpiod_hog+0x30/0x154
>> [ 0.618913] LR is at of_gpiochip_add+0x2fc/0x4e4
>> [ 0.623671] pc : [<c055213c>] lr : [<c0553ff0>] psr: 60000013
>> [ 0.630130] sp : ce09bba0 ip : cdf08095 fp : 00000000
>> [ 0.635516] r10: c0bfcf24 r9 : 00000000 r8 : 00000007
>> [ 0.640902] r7 : cdf08088 r6 : 00000000 r5 : 00000000 r4 : ce191e40
>> [ 0.647630] r3 : 00000000 r2 : 00000000 r1 : cdf08088 r0 : ce191e40
>> [ 0.654361] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none
>> [ 0.661718] Control: 10c5387d Table: 80004019 DAC: 00000051
>> [ 0.667642] Process swapper/0 (pid: 1, stack limit = 0x(ptrval))
>> [...]
>> [ 0.973593] [<c055213c>] (gpiod_hog) from [<c0553ff0>] (of_gpiochip_add+0x2fc/0x4e4)
>> [ 0.981588] [<c0553ff0>] (of_gpiochip_add) from [<c05528a0>] (gpiochip_add_data_with_key+
>> 0x5a0/0x990)
>> [ 0.991102] [<c05528a0>] (gpiochip_add_data_with_key) from [<c0556d8c>] (omap_gpio_probe+
>> 0x37c/0x75c)
>> [ 1.000613] [<c0556d8c>] (omap_gpio_probe) from [<c06049c0>] (platform_drv_probe+0x48/0x9
>> 8)
>> [ 1.009237] [<c06049c0>] (platform_drv_probe) from [<c0602a04>] (really_probe+0x220/0x2d4
>> )
>> [ 1.017764] [<c0602a04>] (really_probe) from [<c0602c18>] (driver_probe_device+0x5c/0x164
>> )
>> [ 1.026293] [<c0602c18>] (driver_probe_device) from [<c0600d44>] (bus_for_each_drv+0x54/0
>> xb8)
>> [ 1.035090] [<c0600d44>] (bus_for_each_drv) from [<c060276c>] (__device_attach+0xcc/0x13c
>> )
>> [ 1.043615] [<c060276c>] (__device_attach) from [<c0601b88>] (bus_probe_device+0x88/0x90)
>> [ 1.052051] [<c0601b88>] (bus_probe_device) from [<c05fea18>] (device_add+0x3d8/0x608)
>> [ 1.060223] [<c05fea18>] (device_add) from [<c07343b8>] (of_platform_device_create_pdata+
>> 0x8c/0xc0)
>> [ 1.069552] [<c07343b8>] (of_platform_device_create_pdata) from [<c07345c4>] (of_platform
>> _bus_create+0x190/0x228)
>> [ 1.080134] [<c07345c4>] (of_platform_bus_create) from [<c0734610>] (of_platform_bus_crea
>> te+0x1dc/0x228)
>> [ 1.089909] [<c0734610>] (of_platform_bus_create) from [<c073478c>] (of_platform_populate
>> +0x5c/0xac)
>> [ 1.099333] [<c073478c>] (of_platform_populate) from [<c0d12614>] (pdata_quirks_init+0x6c
>> /0x90)
>> [ 1.108306] [<c0d12614>] (pdata_quirks_init) from [<c0d12144>] (omap_generic_init+0xc/0x1
>> 8)
>> [ 1.116933] [<c0d12144>] (omap_generic_init) from [<c0d03eb0>] (customize_machine+0x1c/0x
>> 30)
>> [ 1.125645] [<c0d03eb0>] (customize_machine) from [<c01030e4>] (do_one_initcall+0x80/0x31
>> 0)
>> [ 1.134265] [<c01030e4>] (do_one_initcall) from [<c0d01244>] (kernel_init_freeable+0x3c4/
>> 0x4ac)
>> [ 1.143238] [<c0d01244>] (kernel_init_freeable) from [<c0900f28>] (kernel_init+0x8/0x114)
>> [ 1.151673] [<c0900f28>] (kernel_init) from [<c01010b4>] (ret_from_fork+0x14/0x20)
>> [ 1.159475] Exception stack(0xce09bfb0 to 0xce09bff8)
>> [ 1.164686] bfa0: 00000000 00000000 00000000 00000000
>> [ 1.173119] bfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
>> [ 1.181551] bfe0: 00000000 00000000 00000000 00000000 00000013 00000000
>> [ 1.188378] Code: 0a000002 e3530000 01a09003 159392b4 (e59352b8)
>> [ 1.194766] ---[ end trace d5c17cd400f50a22 ]---
>> [ 1.199606] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
>> [ 1.199606]
>> [ 1.209052] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000
>> 00b
>> [ 1.209052] ]---
>> [ 3.172292] random: fast init done
>>
>> Full log: https://pastebin.ubuntu.com/p/jG8nN6CTBP/
>>
>> Reverting this patch from linux-next allows to boot to prompt.
>>
>> Regards
>> Vignesh
>>
>>> ---
>>> drivers/gpio/gpiolib.c | 27 +++++++++++++--------------
>>> 1 file changed, 13 insertions(+), 14 deletions(-)
>>>
>>> diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
>>> index 907019b67a58..e016b22658ff 100644
>>> --- a/drivers/gpio/gpiolib.c
>>> +++ b/drivers/gpio/gpiolib.c
>>> @@ -1349,20 +1349,6 @@ int gpiochip_add_data_with_key(struct gpio_chip *chip, void *data,
>>>
>>> spin_unlock_irqrestore(&gpio_lock, flags);
>>>
>>> - for (i = 0; i < chip->ngpio; i++) {
>>> - struct gpio_desc *desc = &gdev->descs[i];
>>> -
>>> - desc->gdev = gdev;
>>> -
>>> - /* REVISIT: most hardware initializes GPIOs as inputs (often
>>> - * with pullups enabled) so power usage is minimized. Linux
>>> - * code should set the gpio direction first thing; but until
>>> - * it does, and in case chip->get_direction is not set, we may
>>> - * expose the wrong direction in sysfs.
>>> - */
>>> - desc->flags = !chip->direction_input ? (1 << FLAG_IS_OUT) : 0;
>>> - }
>>> -
>>> #ifdef CONFIG_PINCTRL
>>> INIT_LIST_HEAD(&gdev->pin_ranges);
>>> #endif
>>> @@ -1391,6 +1377,19 @@ int gpiochip_add_data_with_key(struct gpio_chip *chip, void *data,
>>> if (status)
>>> goto err_remove_chip;
>>>
>>> + for (i = 0; i < chip->ngpio; i++) {
>>> + struct gpio_desc *desc = &gdev->descs[i];
>>> +
>>> + desc->gdev = gdev;
>>> +
>>> + if (chip->get_direction && gpiochip_line_is_valid(chip, i))
>>> + desc->flags = !chip->get_direction(chip, i) ?
>>> + (1 << FLAG_IS_OUT) : 0;
>>> + else
>>> + desc->flags = !chip->direction_input ?
>>> + (1 << FLAG_IS_OUT) : 0;
>>> + }
>>> +
>>> acpi_gpiochip_add(chip);
>>>
>>> machine_gpiochip_add(chip);
>>>
>>
>
>
