Re: [PATCH] ARM: DTS: OMAP5: enable OTG role for DWC3 controller

[Tony Lindgren <tony@xxxxxxxxxxx>]

* H. Nikolaus Schaller <hns@xxxxxxxxxxxxx> [180928 08:58]:
> Since SMPS10 and OTG cable detection extcon are described here, and
> work to enable OTG power when an OTG cable is plugged in, we can
> define OTG mode in the controller (which is disabled by default in
> omap5.dtsi).
> 
> Tested on OMAP5EVM and Pyra.
> 
> Suggested-by: Roger Quadros <rogerq@xxxxxx>
> Signed-off-by: H. Nikolaus Schaller <hns@xxxxxxxxxxxxx>

Thanks applying into omap-for-v4.20/dt.

Regards,

Tony