Hi OMAP3 DTS Maintainers, is there any progress in merging this patch series? We have some more patches in our queue which depend on them. BR and thanks, Nikolaus Schaller > Am 31.07.2018 um 09:11 schrieb H. Nikolaus Schaller <hns@xxxxxxxxxxxxx>: > > * Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxxxx> > asked why we have reg=<0> for port@1. > Based on his comment we have removed the change for > the opa362 reg property in the DT, but worked out a correct > fix in the opa362 driver which solves the issue better. > See: https://lore.kernel.org/patchwork/patch/968407/ > * Ladislav Michl <ladis@xxxxxxxxxxxxxx> > has found a typo and we discussed NAND/OneNAND and > how the partitions should be setup. A better solution > would be to do it completely by u-boot, but unless we have > that, we must fix it here. > * we omit the patch that replaces ti,non-removable by non-removable > since additional internal tests have shown that it makes > problems with finding the rootfs boot partition. > * instead we add a patch that explicitly sets broken-cd for mmc1. > > PATCH V1 2018-07-25 09:00:42: > We have not upstreamed significant improvements collected > in the GTA04 vendor kernel tree for some years. The result > is that distribution kernels derived from upstream (e.g. > Debian) lag behind and miss significant features and fixes. > > > H. Nikolaus Schaller (32): > ARM: dts: omap3-gta04: fix typo in backlight pins node name > ARM: dts: omap3-gta04: fix some whitespace and tab style errors > ARM: dts: omap3-gta04: give spi_lcd node a label so that we can > overwrite in other DTS files > ARM: dts: omap3-gta04: fixes for tvout / venc > ARM: dts: omap3-gta04: add devconf1 setup for correct tvout pins > ARM: dts: omap3-gta04: tvout: enable as display1 alias > ARM: dts: omap3-gta04: fix touchscreen tsc2007 > ARM: dts: omap3-gta04: add pinmux for bmp085 EOC interrupt > ARM: dts: omap3-gta04: make NAND partitions compatible with recent > U-Boot > ARM: dts: omap3-gta04: update gpmc NAND setup > ARM: dts: omap3-gta04: keep vpll2 always on > ARM: dts: omap3-gta04: add a comment how to reference the tca6507 gpio > ARM: dts: omap3-gta04: add warning comment to vaux2 regulator > ARM: dts: omap3-gta04: explicitly describe that mmc1 has no CD/WP > ARM: dts: omap3-gta04: make use of input event include file and > constants > ARM: dts: omap3-gta04: map antenna detect GPIO to SW_LINEIN_INSERT key > event > ARM: dts: omap3-gta04: add camera interface parallel port > ARM: dts: omap3-gta04: add camera pinmux > ARM: dts: omap3-gta04: add mcbsp (audio subsystem) pinmux > ARM: dts: omap3-gta04: add devconf0 setup for mcbsp1 clock pins > ARM: dts: omap3-gta04: add mcbsp (audio subsystem) nodes > ARM: dts: omap3-gta04a3: fix model name for A3 variant > ARM: dts: omap3-gta04a4: fix model name for A4 variant > ARM: dts: omap3-gta04a5: fix copyright of A5 variant > ARM: dts: omap3-gta04a5: fix model name > ARM: dts: omap3-gta04a5: fix whitepsace and tab style > ARM: dts: omap3-gta04a5: add support for PPS > ARM: dts: omap3-gta04a5: disable IrDA receiver to save power > ARM: dts: omap3-gta04a5: add support for ti,wl1837 module > ARM: dts: omap3-gta04a5: uses different sensors than gta04a4 > ARM: dts: omap3-gta04a5: define pinmux for bluetooth enable of > ti,wl1837 module > ARM: dts: omap3-gta04a5one: define GTA04A5 variant with OneNAND > > arch/arm/boot/dts/omap3-gta04.dtsi | 248 +++++++++++++++++++++++++++++---- > arch/arm/boot/dts/omap3-gta04a3.dts | 2 +- > arch/arm/boot/dts/omap3-gta04a4.dts | 2 +- > arch/arm/boot/dts/omap3-gta04a5.dts | 129 ++++++++++++++++- > arch/arm/boot/dts/omap3-gta04a5one.dts | 114 +++++++++++++++ > 5 files changed, 462 insertions(+), 33 deletions(-) > create mode 100644 arch/arm/boot/dts/omap3-gta04a5one.dts > > -- > 2.12.2 >
