The cpsw-phy-sel device is not a child of the cpsw interconnect target
module. It lives in the system control module.
Let's fix this issue by trying to use cpsw-phy-sel phandle first if it
exists and if not fall back to current usage of trying to find the
cpsw-phy-sel child. That way the phy sel driver can be a child of the
system control module where it belongs in the device tree.
Without this fix, we cannot have a proper interconnect target module
hierarchy in device tree for things like genpd.
For documenting it, looks like the cpsw-phy-sel is used for all cpsw device
tree nodes. It's missing the related binding documentation, so let's also
update the binding documentation accordingly.
Cc: devicetree@xxxxxxxxxxxxxxx
Cc: Grygorii Strashko <grygorii.strashko@xxxxxx>
Cc: Ivan Khoronzhuk <ivan.khoronzhuk@xxxxxxxxxx>
Cc: Mark Rutland <mark.rutland@xxxxxxx>
Cc: Murali Karicheri <m-karicheri2@xxxxxx>
Cc: Rob Herring <robh+dt@xxxxxxxxxx>
Signed-off-by: Tony Lindgren <tony@xxxxxxxxxxx>
---
Documentation/devicetree/bindings/net/cpsw.txt | 5 +++++
drivers/net/ethernet/ti/cpsw-phy-sel.c | 9 ++++++---
2 files changed, 11 insertions(+), 3 deletions(-)
diff --git a/Documentation/devicetree/bindings/net/cpsw.txt b/Documentation/devicetree/bindings/net/cpsw.txt
--- a/Documentation/devicetree/bindings/net/cpsw.txt
+++ b/Documentation/devicetree/bindings/net/cpsw.txt
@@ -19,6 +19,9 @@ Required properties:
- slaves : Specifies number for slaves
- active_slave : Specifies the slave to use for time stamping,
ethtool and SIOCGMIIPHY
+- cpsw-phy-sel : Specifies the phandle to the CPSW phy mode selection
+ device. Note that in legacy cases cpsw-phy-sel may be
+ a child device instead of a phandle.
Optional properties:
- ti,hwmods : Must be "cpgmac0"
@@ -75,6 +78,7 @@ Examples:
cpts_clock_mult = <0x80000000>;
cpts_clock_shift = <29>;
syscon = <&cm>;
+ cpsw-phy-sel = <&phy_sel>;
cpsw_emac0: slave@0 {
phy_id = <&davinci_mdio>, <0>;
phy-mode = "rgmii-txid";
@@ -103,6 +107,7 @@ Examples:
cpts_clock_mult = <0x80000000>;
cpts_clock_shift = <29>;
syscon = <&cm>;
+ cpsw-phy-sel = <&phy_sel>;
cpsw_emac0: slave@0 {
phy_id = <&davinci_mdio>, <0>;
phy-mode = "rgmii-txid";
diff --git a/drivers/net/ethernet/ti/cpsw-phy-sel.c b/drivers/net/ethernet/ti/cpsw-phy-sel.c
--- a/drivers/net/ethernet/ti/cpsw-phy-sel.c
+++ b/drivers/net/ethernet/ti/cpsw-phy-sel.c
@@ -170,10 +170,13 @@ void cpsw_phy_sel(struct device *dev, phy_interface_t phy_mode, int slave)
struct device_node *node;
struct cpsw_phy_sel_priv *priv;
- node = of_get_child_by_name(dev->of_node, "cpsw-phy-sel");
+ node = of_parse_phandle(dev->of_node, "cpsw-phy-sel", 0);
if (!node) {
- dev_err(dev, "Phy mode driver DT not found\n");
- return;
+ node = of_get_child_by_name(dev->of_node, "cpsw-phy-sel");
+ if (!node) {
+ dev_err(dev, "Phy mode driver DT not found\n");
+ return;
+ }
}
dev = bus_find_device(&platform_bus_type, NULL, node, match);
--
2.17.1
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
