The opa362 amplifier has two ports, an input (usually connected
to the OMAP3 VENC) and an output port connected to the external
connector.
These are usually defined as input port@0 and outpt port@1 in
the DT and really distinguished by the reg = <port_num> property
of these nodes.
But we are missing to define the output port as number 1 so
it does not match the DT entry.
Signed-off-by: H. Nikolaus Schaller <hns@xxxxxxxxxxxxx>
---
drivers/gpu/drm/omapdrm/displays/encoder-opa362.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/gpu/drm/omapdrm/displays/encoder-opa362.c b/drivers/gpu/drm/omapdrm/displays/encoder-opa362.c
index afee1b8b457a..296d46f060b2 100644
--- a/drivers/gpu/drm/omapdrm/displays/encoder-opa362.c
+++ b/drivers/gpu/drm/omapdrm/displays/encoder-opa362.c
@@ -208,6 +208,7 @@ static int opa362_probe(struct platform_device *pdev)
dssdev->type = OMAP_DISPLAY_TYPE_VENC;
dssdev->output_type = OMAP_DISPLAY_TYPE_VENC;
dssdev->owner = THIS_MODULE;
+ dssdev->port_num = 1; /* second port */
r = omapdss_register_output(dssdev);
if (r) {
--
2.12.2
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
