McBSP1 needs sepcial "pinctrl" for the clocks.
Signed-off-by: H. Nikolaus Schaller <hns@xxxxxxxxxxxxx>
---
arch/arm/boot/dts/omap3-gta04.dtsi | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi
index 935a2a707737..f6abdef556c1 100644
--- a/arch/arm/boot/dts/omap3-gta04.dtsi
+++ b/arch/arm/boot/dts/omap3-gta04.dtsi
@@ -187,6 +187,24 @@
reset-gpios = <&tca6507 0 GPIO_ACTIVE_LOW>; /* W2CBW003 reset through tca6507 */
};
+ /* devconf0 setup for mcbsp1 clock pins */
+ pinmux_mcbsp1@48002274 {
+ compatible = "pinctrl-single";
+ reg = <0x48002274 4>; /* CONTROL_DEVCONF0 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-single,bit-per-mux;
+ pinctrl-single,register-width = <32>;
+ pinctrl-single,function-mask = <0x7>; /* MCBSP1 CLK pinmux */
+ #pinctrl-cells = <2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcbsp1_devconf0_pins>;
+ mcbsp1_devconf0_pins: pinmux_mcbsp1_devconf0_pins {
+ /* offset bits mask */
+ pinctrl-single,bits = <0x00 0x08 0x1c>; /* set MCBSP1_CLKR */
+ };
+ };
+
/* devconf1 setup for tvout pins */
pinmux_tv_out@480022d8 {
compatible = "pinctrl-single";
--
2.12.2
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
