* fix connector compatibility (composite) * add comment for gpio1 23 * fix port reg number * add proper #address-cells * we use only one venc_out channel * fix invert-polarity for the VENC since we have an inverting OPA362 Amplifier Signed-off-by: H. Nikolaus Schaller <hns@xxxxxxxxxxxxx> --- arch/arm/boot/dts/omap3-gta04.dtsi | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi index 2db670e2a4bd..fa887743860e 100644 --- a/arch/arm/boot/dts/omap3-gta04.dtsi +++ b/arch/arm/boot/dts/omap3-gta04.dtsi @@ -131,7 +131,7 @@ }; tv0: connector { - compatible = "svideo-connector"; + compatible = "composite-video-connector"; label = "tv"; port { @@ -143,7 +143,7 @@ tv_amp: opa362 { compatible = "ti,opa362"; - enable-gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>; + enable-gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>; /* GPIO_23 to enable video out amplifier */ ports { #address-cells = <1>; @@ -157,7 +157,7 @@ }; port@1 { - reg = <1>; + reg = <0>; opa_out: endpoint { remote-endpoint = <&tv_connector_in>; }; @@ -551,10 +551,14 @@ vdda-supply = <&vdac>; + #address-cells = <1>; + #size-cells = <0>; + port { + reg = <0>; venc_out: endpoint { remote-endpoint = <&opa_in>; - ti,channels = <2>; + ti,channels = <1>; ti,invert-polarity; }; }; -- 2.12.2 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html