Hi,
Please ignore this submission, I'm going to send this patch with two others in
a single series.
Thanks,
Janusz
On Tuesday, July 17, 2018 6:54:00 PM CEST Janusz Krzysztofik wrote:
> Now as Amstrad Delta board - the only user of this driver - provides
> GPIO lookup tables, switch from GPIO numbers to GPIO descriptors and
> use the table to locate required GPIO pins.
>
> Declare static variables for storing GPIO descriptors and replace
> gpio_ function calls with their gpiod_ equivalents. Move GPIO lookup
> to the driver probe function so device initialization can be deferred
> instead of aborted if a GPIO pin is not yet available.
>
> Pin naming used by the driver should be followed while respective GPIO
> lookup table is initialized by a board init code.
>
> Signed-off-by: Janusz Krzysztofik <jmkrzyszt@xxxxxxxxx>
> ---
> Changelog:
> v2: Remove problematic error code conversion, no longer needed if used
> on top of commit d08605a64e67 ("ARM: OMAP1: ams-delta: move late
> devices back to init_machine") and commit 8853daf3b4ac ("gpiolib:
> Defer on non-DT find_chip_by_name() failure") already in linux-next.
>
> drivers/video/fbdev/omap/lcd_ams_delta.c | 55 +++++++++++++-------------------
> 1 file changed, 22 insertions(+), 33 deletions(-)
>
> diff --git a/drivers/video/fbdev/omap/lcd_ams_delta.c b/drivers/video/fbdev/omap/lcd_ams_delta.c
> index e8c748a0dfe2..cddbd00cbf9f 100644
> --- a/drivers/video/fbdev/omap/lcd_ams_delta.c
> +++ b/drivers/video/fbdev/omap/lcd_ams_delta.c
> @@ -24,11 +24,10 @@
> #include <linux/platform_device.h>
> #include <linux/io.h>
> #include <linux/delay.h>
> +#include <linux/gpio/consumer.h>
> #include <linux/lcd.h>
> -#include <linux/gpio.h>
>
> #include <mach/hardware.h>
> -#include <mach/board-ams-delta.h>
>
> #include "omapfb.h"
>
> @@ -41,6 +40,8 @@
> /* LCD class device section */
>
> static int ams_delta_lcd;
> +static struct gpio_desc *gpiod_vblen;
> +static struct gpio_desc *gpiod_ndisp;
>
> static int ams_delta_lcd_set_power(struct lcd_device *dev, int power)
> {
> @@ -99,41 +100,17 @@ static struct lcd_ops ams_delta_lcd_ops = {
>
> /* omapfb panel section */
>
> -static const struct gpio _gpios[] = {
> - {
> - .gpio = AMS_DELTA_GPIO_PIN_LCD_VBLEN,
> - .flags = GPIOF_OUT_INIT_LOW,
> - .label = "lcd_vblen",
> - },
> - {
> - .gpio = AMS_DELTA_GPIO_PIN_LCD_NDISP,
> - .flags = GPIOF_OUT_INIT_LOW,
> - .label = "lcd_ndisp",
> - },
> -};
> -
> -static int ams_delta_panel_init(struct lcd_panel *panel,
> - struct omapfb_device *fbdev)
> -{
> - return gpio_request_array(_gpios, ARRAY_SIZE(_gpios));
> -}
> -
> -static void ams_delta_panel_cleanup(struct lcd_panel *panel)
> -{
> - gpio_free_array(_gpios, ARRAY_SIZE(_gpios));
> -}
> -
> static int ams_delta_panel_enable(struct lcd_panel *panel)
> {
> - gpio_set_value(AMS_DELTA_GPIO_PIN_LCD_NDISP, 1);
> - gpio_set_value(AMS_DELTA_GPIO_PIN_LCD_VBLEN, 1);
> + gpiod_set_value(gpiod_ndisp, 1);
> + gpiod_set_value(gpiod_vblen, 1);
> return 0;
> }
>
> static void ams_delta_panel_disable(struct lcd_panel *panel)
> {
> - gpio_set_value(AMS_DELTA_GPIO_PIN_LCD_VBLEN, 0);
> - gpio_set_value(AMS_DELTA_GPIO_PIN_LCD_NDISP, 0);
> + gpiod_set_value(gpiod_vblen, 0);
> + gpiod_set_value(gpiod_ndisp, 0);
> }
>
> static struct lcd_panel ams_delta_panel = {
> @@ -154,8 +131,6 @@ static struct lcd_panel ams_delta_panel = {
> .pcd = 0,
> .acb = 37,
>
> - .init = ams_delta_panel_init,
> - .cleanup = ams_delta_panel_cleanup,
> .enable = ams_delta_panel_enable,
> .disable = ams_delta_panel_disable,
> };
> @@ -166,9 +141,23 @@ static struct lcd_panel ams_delta_panel = {
> static int ams_delta_panel_probe(struct platform_device *pdev)
> {
> struct lcd_device *lcd_device = NULL;
> -#ifdef CONFIG_LCD_CLASS_DEVICE
> int ret;
>
> + gpiod_vblen = devm_gpiod_get(&pdev->dev, "vblen", GPIOD_OUT_LOW);
> + if (IS_ERR(gpiod_vblen)) {
> + ret = PTR_ERR(gpiod_vblen);
> + dev_err(&pdev->dev, "VBLEN GPIO request failed (%d)\n", ret);
> + return ret;
> + }
> +
> + gpiod_ndisp = devm_gpiod_get(&pdev->dev, "ndisp", GPIOD_OUT_LOW);
> + if (IS_ERR(gpiod_ndisp)) {
> + ret = PTR_ERR(gpiod_ndisp);
> + dev_err(&pdev->dev, "NDISP GPIO request failed (%d)\n", ret);
> + return ret;
> + }
> +
> +#ifdef CONFIG_LCD_CLASS_DEVICE
> lcd_device = lcd_device_register("omapfb", &pdev->dev, NULL,
> &ams_delta_lcd_ops);
>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
