Before updating wdt2 to probe with ti-sysc we want to have wdt3
probed with ti-sysc to avoid having them unnecessarily swap order.
With ti-sysc, we probe child devices at module_init time while
and until l4 abe interconnect is converted to use ti-sysc, wdt3
will probe earlier with legacy platform data.
Cc: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
Signed-off-by: Tony Lindgren <tony@xxxxxxxxxxx>
---
arch/arm/boot/dts/omap4.dtsi | 31 ++++++++++++++++++++++++++-----
1 file changed, 26 insertions(+), 5 deletions(-)
diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
--- a/arch/arm/boot/dts/omap4.dtsi
+++ b/arch/arm/boot/dts/omap4.dtsi
@@ -787,12 +787,33 @@
ti,hwmods = "wd_timer2";
};
- wdt3: wdt@40130000 {
- compatible = "ti,omap4-wdt", "ti,omap3-wdt";
- reg = <0x40130000 0x80>, /* MPU private access */
- <0x49030000 0x80>; /* L3 Interconnect */
- interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+ target-module@40130000 {
+ compatible = "ti,sysc-omap2", "ti,sysc";
ti,hwmods = "wd_timer3";
+ reg = <0x40130000 0x4>,
+ <0x40130010 0x4>,
+ <0x40130014 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_EMUFREE |
+ SYSC_OMAP2_SOFTRESET)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,syss-mask = <1>;
+ /* Domains (V, P, C): abe, abe_pwrdm, abe_clkdm */
+ clocks = <&abe_clkctrl OMAP4_WD_TIMER3_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x00000000 0x40130000 0x1000>, /* MPU private access */
+ <0x49030000 0x49030000 0x0080>; /* L3 Interconnect */
+
+ wdt3: wdt@0 {
+ compatible = "ti,omap4-wdt", "ti,omap3-wdt";
+ reg = <0x0 0x80>;
+ interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+ };
};
mcpdm: mcpdm@40132000 {
--
2.17.1
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
