* Belisko Marek <marek.belisko@xxxxxxxxx> [180620 09:40]:
> Hello,
>
> I'm trying to fix warning (for omap5 board) produced by recent change
> to avoid using IRQ_TYPE_NONE like:
> [ 1.818666] WARNING: CPU: 1 PID: 778 at
> drivers/irqchip/irq-gic.c:1016 gic_irq_domain_translate+0x78/0x100
> [ 1.828839] Modules linked in:
>
> I did look to other commit which did update and without deep knowledge
> I just simply do this small change:
> diff --git a/arch/arm/boot/dts/omap5-board-common.dtsi
> b/arch/arm/boot/dts/omap5-board-common.dtsi
> index 218892b..ab2df8c 100644
> --- a/arch/arm/boot/dts/omap5-board-common.dtsi
> +++ b/arch/arm/boot/dts/omap5-board-common.dtsi
> @@ -393,7 +393,7 @@
>
> palmas: palmas@48 {
> compatible = "ti,palmas";
> - interrupts = <GIC_SPI 7 IRQ_TYPE_NONE>; /* IRQ_SYS_1N */
> + interrupts = <GIC_SPI 7 IRQ_TYPE_HIGH>; /* IRQ_SYS_1N */
> reg = <0x48>;
> interrupt-controller;
> #interrupt-cells = <2>;
>
> and it looks board boots fine. Only issue is that gpadc driver is not
> working (at least not getting interrupts at all ADC fails with
> timeout). I did look to gpadc driver and driver is not using
> interrupts defined in dts but request interrupt directly from palmas
> mfd module. Any ideas what needs to be changed to have gpadc again
> working with mentioned patch?
Can you try with IRQF_TRIGGER_HIGH added also to the flags to
regmap_add_irq_chip() in drivers/mfd/palmas.c?
Regards,
Tony
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
