From: Franklin S Cooper Jr <fcooper@xxxxxx>
Add support for the MCAN peripheral which supports both classic
CAN messages along with the new CAN-FD message.
Add MCAN node to evm and enable it with a maximum datarate of 5 mbps
Signed-off-by: Faiz Abbas <faiz_abbas@xxxxxx>
---
arch/arm/boot/dts/dra76-evm.dts | 7 +++++++
arch/arm/boot/dts/dra76x.dtsi | 15 +++++++++++++++
2 files changed, 22 insertions(+)
diff --git a/arch/arm/boot/dts/dra76-evm.dts b/arch/arm/boot/dts/dra76-evm.dts
index 2deb96405d06..277765257410 100644
--- a/arch/arm/boot/dts/dra76-evm.dts
+++ b/arch/arm/boot/dts/dra76-evm.dts
@@ -404,3 +404,10 @@
phys = <&pcie1_phy>, <&pcie2_phy>;
phy-names = "pcie-phy0", "pcie-phy1";
};
+
+&m_can0 {
+ status = "okay";
+ can-transceiver {
+ max-bitrate = <5000000>;
+ };
+};
diff --git a/arch/arm/boot/dts/dra76x.dtsi b/arch/arm/boot/dts/dra76x.dtsi
index 57b8dc0fe719..d7a8cc569808 100644
--- a/arch/arm/boot/dts/dra76x.dtsi
+++ b/arch/arm/boot/dts/dra76x.dtsi
@@ -27,6 +27,21 @@
ti,syss-mask = <1>;
clocks = <&wkupaon_clkctrl DRA7_ADC_CLKCTRL 0>;
clock-names = "fck";
+
+ m_can0: mcan@42c01a00 {
+ compatible = "bosch,m_can";
+ reg = <0x1a00 0x4000>, <0x0 0x18FC>;
+ reg-names = "m_can", "message_ram";
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "int0", "int1";
+ ti,hwmods = "mcan";
+ clocks = <&mcan_clk>, <&l3_iclk_div>;
+ clock-names = "cclk", "hclk";
+ bosch,mram-cfg = <0x0 0 0 32 0 0 1 1>;
+ status = "disabled";
+ };
};
};
--
2.17.0
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
