* Include ti-thermal.h header in ti-bandgap.c.
* ->expose_sensor and ->remove_sensor methods are always defined
and set to ti_thermal_[expose,remove]_sensor() so we can use
these functions directly (dummy functions will be provided in
case of CONFIG_TI_THERMAL=n).
* ->report_temperature is defined only when TALERT feature is
supported so it also redundant - it is only used when TALERT
feature is enabled and the method is always defined to
ti_thermal_report_sensor_temperature() (dummy function will
be provided in case of CONFIG_TI_THERMAL=n).
There should be no functional changes caused by this patch.
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@xxxxxxxxxxx>
---
drivers/thermal/ti-soc-thermal/dra752-thermal-data.c | 3 ---
drivers/thermal/ti-soc-thermal/omap3-thermal-data.c | 6 ------
drivers/thermal/ti-soc-thermal/omap4-thermal-data.c | 8 --------
drivers/thermal/ti-soc-thermal/omap5-thermal-data.c | 3 ---
drivers/thermal/ti-soc-thermal/ti-bandgap.c | 20 ++++++++------------
drivers/thermal/ti-soc-thermal/ti-bandgap.h | 6 ------
6 files changed, 8 insertions(+), 38 deletions(-)
diff --git a/drivers/thermal/ti-soc-thermal/dra752-thermal-data.c b/drivers/thermal/ti-soc-thermal/dra752-thermal-data.c
index e8ab7e5..c854642 100644
--- a/drivers/thermal/ti-soc-thermal/dra752-thermal-data.c
+++ b/drivers/thermal/ti-soc-thermal/dra752-thermal-data.c
@@ -336,9 +336,6 @@
.conv_table = dra752_adc_to_temp,
.adc_start_val = DRA752_ADC_START_VALUE,
.adc_end_val = DRA752_ADC_END_VALUE,
- .expose_sensor = ti_thermal_expose_sensor,
- .remove_sensor = ti_thermal_remove_sensor,
- .report_temperature = ti_thermal_report_sensor_temperature,
.sensors = {
{
.registers = &dra752_mpu_temp_sensor_registers,
diff --git a/drivers/thermal/ti-soc-thermal/omap3-thermal-data.c b/drivers/thermal/ti-soc-thermal/omap3-thermal-data.c
index f536680..cc6498e 100644
--- a/drivers/thermal/ti-soc-thermal/omap3-thermal-data.c
+++ b/drivers/thermal/ti-soc-thermal/omap3-thermal-data.c
@@ -80,9 +80,6 @@
.conv_table = omap34xx_adc_to_temp,
.adc_start_val = 0,
.adc_end_val = 127,
- .expose_sensor = ti_thermal_expose_sensor,
- .remove_sensor = ti_thermal_remove_sensor,
-
.sensors = {
{
.registers = &omap34xx_mpu_temp_sensor_registers,
@@ -148,9 +145,6 @@
.conv_table = omap36xx_adc_to_temp,
.adc_start_val = 0,
.adc_end_val = 127,
- .expose_sensor = ti_thermal_expose_sensor,
- .remove_sensor = ti_thermal_remove_sensor,
-
.sensors = {
{
.registers = &omap36xx_mpu_temp_sensor_registers,
diff --git a/drivers/thermal/ti-soc-thermal/omap4-thermal-data.c b/drivers/thermal/ti-soc-thermal/omap4-thermal-data.c
index 85ba9dc..14d9fe2 100644
--- a/drivers/thermal/ti-soc-thermal/omap4-thermal-data.c
+++ b/drivers/thermal/ti-soc-thermal/omap4-thermal-data.c
@@ -72,8 +72,6 @@
.conv_table = omap4430_adc_to_temp,
.adc_start_val = OMAP4430_ADC_START_VALUE,
.adc_end_val = OMAP4430_ADC_END_VALUE,
- .expose_sensor = ti_thermal_expose_sensor,
- .remove_sensor = ti_thermal_remove_sensor,
.sensors = {
{
.registers = &omap4430_mpu_temp_sensor_registers,
@@ -202,9 +200,6 @@
.conv_table = omap4460_adc_to_temp,
.adc_start_val = OMAP4460_ADC_START_VALUE,
.adc_end_val = OMAP4460_ADC_END_VALUE,
- .expose_sensor = ti_thermal_expose_sensor,
- .remove_sensor = ti_thermal_remove_sensor,
- .report_temperature = ti_thermal_report_sensor_temperature,
.sensors = {
{
.registers = &omap4460_mpu_temp_sensor_registers,
@@ -233,9 +228,6 @@
.conv_table = omap4460_adc_to_temp,
.adc_start_val = OMAP4460_ADC_START_VALUE,
.adc_end_val = OMAP4460_ADC_END_VALUE,
- .expose_sensor = ti_thermal_expose_sensor,
- .remove_sensor = ti_thermal_remove_sensor,
- .report_temperature = ti_thermal_report_sensor_temperature,
.sensors = {
{
.registers = &omap4460_mpu_temp_sensor_registers,
diff --git a/drivers/thermal/ti-soc-thermal/omap5-thermal-data.c b/drivers/thermal/ti-soc-thermal/omap5-thermal-data.c
index e384be1..843faa7 100644
--- a/drivers/thermal/ti-soc-thermal/omap5-thermal-data.c
+++ b/drivers/thermal/ti-soc-thermal/omap5-thermal-data.c
@@ -273,9 +273,6 @@
.conv_table = omap5430_adc_to_temp,
.adc_start_val = OMAP5430_ADC_START_VALUE,
.adc_end_val = OMAP5430_ADC_END_VALUE,
- .expose_sensor = ti_thermal_expose_sensor,
- .remove_sensor = ti_thermal_remove_sensor,
- .report_temperature = ti_thermal_report_sensor_temperature,
.sensors = {
{
.registers = &omap5430_mpu_temp_sensor_registers,
diff --git a/drivers/thermal/ti-soc-thermal/ti-bandgap.c b/drivers/thermal/ti-soc-thermal/ti-bandgap.c
index 097328d..3ac74fe 100644
--- a/drivers/thermal/ti-soc-thermal/ti-bandgap.c
+++ b/drivers/thermal/ti-soc-thermal/ti-bandgap.c
@@ -42,6 +42,7 @@
#include <linux/io.h>
#include "ti-bandgap.h"
+#include "ti-thermal.h"
static int ti_bandgap_force_single_read(struct ti_bandgap *bgp, int id);
@@ -248,8 +249,7 @@ static irqreturn_t ti_bandgap_talert_irq_handler(int irq, void *data)
t_hot, t_cold);
/* report temperature to whom may concern */
- if (bgp->conf->report_temperature)
- bgp->conf->report_temperature(bgp, i);
+ ti_thermal_report_sensor_temperature(bgp, i);
}
spin_unlock(&bgp->lock);
@@ -1017,12 +1017,10 @@ int ti_bandgap_probe(struct platform_device *pdev)
goto remove_sensors;
}
- if (bgp->conf->expose_sensor) {
- domain = bgp->conf->sensors[i].domain;
- ret = bgp->conf->expose_sensor(bgp, i, domain);
- if (ret)
- goto remove_last_cooling;
- }
+ domain = bgp->conf->sensors[i].domain;
+ ret = ti_thermal_expose_sensor(bgp, i, domain);
+ if (ret)
+ goto remove_last_cooling;
}
/*
@@ -1048,8 +1046,7 @@ int ti_bandgap_probe(struct platform_device *pdev)
for (i--; i >= 0; i--) {
if (bgp->conf->sensors[i].unregister_cooling)
bgp->conf->sensors[i].unregister_cooling(bgp, i);
- if (bgp->conf->remove_sensor)
- bgp->conf->remove_sensor(bgp, i);
+ ti_thermal_remove_sensor(bgp, i);
}
ti_bandgap_power(bgp, false);
disable_clk:
@@ -1079,8 +1076,7 @@ int ti_bandgap_remove(struct platform_device *pdev)
if (bgp->conf->sensors[i].unregister_cooling)
bgp->conf->sensors[i].unregister_cooling(bgp, i);
- if (bgp->conf->remove_sensor)
- bgp->conf->remove_sensor(bgp, i);
+ ti_thermal_remove_sensor(bgp, i);
}
ti_bandgap_power(bgp, false);
diff --git a/drivers/thermal/ti-soc-thermal/ti-bandgap.h b/drivers/thermal/ti-soc-thermal/ti-bandgap.h
index 68d39ad..809dbdc 100644
--- a/drivers/thermal/ti-soc-thermal/ti-bandgap.h
+++ b/drivers/thermal/ti-soc-thermal/ti-bandgap.h
@@ -313,9 +313,6 @@ struct ti_temp_sensor {
* @fclock_name: clock name of the functional clock
* @div_ck_name: clock name of the clock divisor
* @sensor_count: count of temperature sensor within this bandgap device
- * @report_temperature: callback to report thermal alert to thermal API
- * @expose_sensor: callback to export sensor to thermal API
- * @remove_sensor: callback to destroy sensor from thermal API
* @sensors: array of sensors present in this bandgap instance
*
* This is a data structure which should hold most of the static configuration
@@ -332,9 +329,6 @@ struct ti_bandgap_data {
char *fclock_name;
char *div_ck_name;
int sensor_count;
- int (*report_temperature)(struct ti_bandgap *bgp, int id);
- int (*expose_sensor)(struct ti_bandgap *bgp, int id, char *domain);
- int (*remove_sensor)(struct ti_bandgap *bgp, int id);
/* this needs to be at the end */
struct ti_temp_sensor sensors[];
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
