On Wed, Apr 25, 2018 at 7:54 AM, Kishon Vijay Abraham I <kishon@xxxxxx> wrote:
> From: Hari Nagalla <hnagalla@xxxxxx>
>
> The wilink module is a combo wireless connectivity sdio
> card based on Texas Instrument's wl18xx solution. It is a
> 4-wire, 1.8V, embedded sdio wlan device with an external
> irq line and is power-controlled by a gpio-based fixed
> regulator.
>
> Add pinmux configuration and IODelay values for MMC4.
> On dra7-evm, MMC4 is used for connecting to wilink module.
>
> IODelay data credits to : Vishal Mahaveer <vishalm@xxxxxx>
> and Sekhar Nori <nsekhar@xxxxxx>
>
> Signed-off-by: Ido Yariv <ido@xxxxxxxxxx>
> Signed-off-by: Eyal Reizer <eyalr@xxxxxx>
> Signed-off-by: Hari Nagalla <hnagalla@xxxxxx>
> Signed-off-by: Sekhar Nori <nsekhar@xxxxxx>
> Signed-off-by: Kishon Vijay Abraham I <kishon@xxxxxx>
> ---
> arch/arm/boot/dts/dra7-evm-common.dtsi | 15 +++++++++++++++
> arch/arm/boot/dts/dra7-evm.dts | 25 +++++++++++++++++++++++++
> 2 files changed, 40 insertions(+)
>
> diff --git a/arch/arm/boot/dts/dra7-evm-common.dtsi b/arch/arm/boot/dts/dra7-evm-common.dtsi
> index 05a7b1a01bc3..3590c40fc112 100644
> --- a/arch/arm/boot/dts/dra7-evm-common.dtsi
> +++ b/arch/arm/boot/dts/dra7-evm-common.dtsi
> @@ -260,3 +260,18 @@
> &pcie1_rc {
> status = "okay";
> };
> +
> +&mmc4 {
> + bus-width = <4>;
> + cap-power-off-card;
> + keep-power-in-suspend;
> + non-removable;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + wlcore: wlcore@2 {
wifi@2
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
