On Sat 2018-03-31 16:43:14, Tony Lindgren wrote: > * Pavel Machek <pavel@xxxxxx> [180331 19:56]: > > On Sat 2018-03-31 21:46:16, Pavel Machek wrote: > > > On Sat 2018-03-31 21:19:39, Pavel Machek wrote: > > > > On Sat 2018-03-31 11:19:35, Tony Lindgren wrote: > > > > > Cool :) Microphone still does not work for me.. I tried tweaking > > > > > the alsamixer settings but no mic. This is with cold boot with > > > > > droid4-kexecboot if that might make a difference, we may have > > > > > some register uninitialized somewhere. Any ideas? > > > > > > > > Ok, I was focusing on the speaker side. > > > > > > > > alsamixer, tab to go to capture settings, set it to 37 37 Mic2 Mic1 > > > > should work, according to my notes, but not recently tested and not > > > > tested against real human. > > > > > > > > I'll attempt to test it, but something in my userland shuts down > > > > system just after boot 60% of time, which is rather annoying. > > > > > > Hmm. So I tried again, and setting Mic1 and back in the capture > > > settings crashed the modem. Bang, disconnected from the USB. > > > > Next try, and it worked this time. > > > > _Before the call_, set mode to Normal and then Call. Then go to > > capture, and set 100 100 Mic2 Mic1. Then place a call, > > > > AT+CFUN=1 > > OK > > ATD6; > > No luck with microphone here :( Using ttyUSB4, AT+CFUN=1 > works, but ATD command on it just hangs the USB interface > and I have to reload phy-mapphone-mdm6600 to reset the > modem. I realized where the difference is. I have ofonod running there, one from maemo leste distribution. It manages to talk to the modem somehow. I guess that accounts for the difference. I guess I should get it out of the picture.... Pavel -- (english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
Attachment:
signature.asc
Description: Digital signature
