Hi!
> > user@devuan:/sys/devices/platform/44000000.ocp/4a064000.usbhshost$
> > sudo lsusb
> > Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
> > Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> > user@devuan:/sys/devices/platform/44000000.ocp/4a064000.usbhshost$
> > zcat /proc/config.gz | grep MAPPH
> > CONFIG_PHY_MAPPHONE_MDM6600=y
> > user@devuan:/sys/devices/platform/44000000.ocp/4a064000.usbhshost$
> > zcat /proc/config.gz | grep OHCI_
> > CONFIG_USB_OHCI_LITTLE_ENDIAN=y
> > CONFIG_USB_OHCI_HCD=y
> > CONFIG_USB_OHCI_HCD_OMAP3=y
> > CONFIG_USB_OHCI_HCD_PLATFORM=y
> > user@devuan:/sys/devices/platform/44000000.ocp/4a064000.usbhshost$
> >
> > As far as I can tell,
> >
> > +CONFIG_USB_WDM=y
> > +CONFIG_USB_SERIAL=y
> > +CONFIG_USB_SERIAL_QUALCOMM=y
> > +CONFIG_USB_SERIAL_WWAN=y
> >
> > should be enabled to enable the drivers (and I did that), but without
> > device showing on the bus...
> >
> > Any ideas?
>
> Do you have the related dts patches picked from next?
>
> fdd192037fce ("ARM: dts: omap4-droid4: Fix USB PHY port naming")
> e5b9fd7bdeb5 ("ARM: dts: omap4-droid4: Configure MDM6600 USB PHY")
>
> But yeah all you need to do is have phy-mapphone-mdm6600 and
> ohci-platform loaded and then ifconfig should show four wwan
> interfaces being added.
ifconfig? I thought I should get /dev/ttyUSB0..3?
Anyway, that does not seem to work. Something is detected now:
[ 10.819549] ALSA device list:
[ 10.831787] #0: HDMI 58006000.encoder
[ 10.841186] Waiting 10 sec before mounting root device...
[ 10.887573] usb 2-1: New USB device found, idVendor=22b8,
idProduct=2a70
[ 10.897521] usb 2-1: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 10.907684] usb 2-1: Product: Flash MZ600
[ 10.914611] usb 2-1: Manufacturer: Motorola, Incorporated
[ 20.967193] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to
feature incompatibilities
But qcserial driver does not bind to that. If I attempt to force it:
root@devuan:/sys/bus/usb-serial/drivers/qcserial# lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 002: ID 22b8:2a70 Motorola PCS
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
root@devuan:/sys/bus/usb-serial/drivers/qcserial# echo "22b8 2a70" >
new_id
[ 2059.267730] usb 2-1: unknown number of interfaces: 9
[ 2059.272949] usb 2-1: unknown number of interfaces: 9
[ 2059.278045] usb 2-1: unknown number of interfaces: 9
[ 2059.283233] usb 2-1: unknown number of interfaces: 9
[ 2059.288330] usb 2-1: unknown number of interfaces: 9
[ 2059.293457] usb 2-1: unknown number of interfaces: 9
[ 2059.298553] usb 2-1: unknown number of interfaces: 9
[ 2059.303680] usb 2-1: unknown number of interfaces: 9
[ 2059.308776] usb 2-1: unknown number of interfaces: 9
I don't get anything useful. Do I need to boot android before booting
Linux or something? How does your lsusb look like?
Thanks,
Pavel
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
Attachment:
signature.asc
Description: Digital signature
