We need the CPCAP MFD and regulator built-in for UART console to work, the rest can be loadable modules. Note that users probably want to also enable serial 8250_OMAP that is not yet enabled by default. Signed-off-by: Tony Lindgren <tony@xxxxxxxxxxx> --- arch/arm/configs/multi_v7_defconfig | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig --- a/arch/arm/configs/multi_v7_defconfig +++ b/arch/arm/configs/multi_v7_defconfig @@ -307,6 +307,7 @@ CONFIG_TOUCHSCREEN_WM97XX=m CONFIG_INPUT_MISC=y CONFIG_INPUT_MAX77693_HAPTIC=m CONFIG_INPUT_MAX8997_HAPTIC=m +CONFIG_INPUT_CPCAP_PWRBUTTON=m CONFIG_INPUT_AXP20X_PEK=m CONFIG_INPUT_ADXL34X=m CONFIG_SERIO_AMBAKMI=y @@ -438,9 +439,11 @@ CONFIG_GPIO_SYSCON=y CONFIG_GPIO_TPS6586X=y CONFIG_GPIO_TPS65910=y CONFIG_BATTERY_ACT8945A=y +CONFIG_BATTERY_CPCAP=m CONFIG_BATTERY_SBS=y CONFIG_BATTERY_MAX17040=m CONFIG_BATTERY_MAX17042=m +CONFIG_CHARGER_CPCAP=m CONFIG_CHARGER_MAX14577=m CONFIG_CHARGER_MAX77693=m CONFIG_CHARGER_MAX8997=m @@ -508,6 +511,7 @@ CONFIG_MFD_MAX8907=y CONFIG_MFD_MAX8997=y CONFIG_MFD_MAX8998=y CONFIG_MFD_RK808=y +CONFIG_MFD_CPCAP=y CONFIG_MFD_PM8XXX=y CONFIG_MFD_QCOM_RPM=y CONFIG_MFD_SPMI_PMIC=y @@ -527,6 +531,7 @@ CONFIG_REGULATOR_AS3711=y CONFIG_REGULATOR_AS3722=y CONFIG_REGULATOR_AXP20X=y CONFIG_REGULATOR_BCM590XX=y +CONFIG_REGULATOR_CPCAP=y CONFIG_REGULATOR_DA9210=y CONFIG_REGULATOR_FAN53555=y CONFIG_REGULATOR_RK808=y @@ -674,6 +679,7 @@ CONFIG_SND_SOC_TEGRA_WM8903=m CONFIG_SND_SOC_TEGRA_WM9712=m CONFIG_SND_SOC_TEGRA_TRIMSLICE=m CONFIG_SND_SOC_TEGRA_ALC5632=m +CONFIG_SND_SOC_CPCAP=m CONFIG_SND_SOC_TEGRA_MAX98090=m CONFIG_SND_SOC_AK4642=m CONFIG_SND_SOC_SGTL5000=m @@ -787,6 +793,7 @@ CONFIG_MMC_SDHCI_OMAP=y CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y CONFIG_LEDS_CLASS_FLASH=m +CONFIG_LEDS_CPCAP=m CONFIG_LEDS_GPIO=y CONFIG_LEDS_PWM=y CONFIG_LEDS_MAX77693=m @@ -837,6 +844,7 @@ CONFIG_RTC_DRV_SUN6I=y CONFIG_RTC_DRV_SUNXI=y CONFIG_RTC_DRV_MV=y CONFIG_RTC_DRV_TEGRA=y +CONFIG_RTC_DRV_CPCAP=m CONFIG_DMADEVICES=y CONFIG_DW_DMAC=y CONFIG_AT_HDMAC=y @@ -909,6 +917,7 @@ CONFIG_IIO_SW_TRIGGER=y CONFIG_AT91_ADC=m CONFIG_AT91_SAMA5D2_ADC=m CONFIG_BERLIN2_ADC=m +CONFIG_CPCAP_ADC=m CONFIG_EXYNOS_ADC=m CONFIG_VF610_ADC=m CONFIG_XILINX_XADC=y -- 2.16.2 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
