Hi, Changes since v1 (sent by Tero): - Rebased on linux-next - Split the dts and binding document patch - Tested it on omap5-uevm that the HPPLL of twl6040 is working (xtal clock is suplied) The v1 of this series was sent about two years ago: http://linux-arm-kernel.infradead.narkive.com/hBBbM4D7/patch-0-5-arm-omap5-add-support-for-fref-xtal-clk but for some reason it was not applied back then, but I have been rolling it on top of linux-next ever since. Regards, Peter --- Peter Ujfalusi (1): ARM: dts: omap5-board-common: Add phandle for mclk clock for twl6040 Tero Kristo (5): ARM: omap2+: control: add support for auxiliary control module instances dt-bindings: omap5: ctrl: Support for control module wkup pad config ARM: dts: omap5: add support for control module wkup pad config ARM: OMAP5: control: add support for control module wkup pad config ARM: dts: omap5: add fref_xtal_ck support .../devicetree/bindings/arm/omap/ctrl.txt | 1 + arch/arm/boot/dts/omap5-board-common.dtsi | 4 ++-- arch/arm/boot/dts/omap5.dtsi | 22 ++++++++++++++++++++++ arch/arm/boot/dts/omap54xx-clocks.dtsi | 10 ++++++++++ arch/arm/mach-omap2/control.c | 20 ++++++++++++++++---- include/linux/clk/ti.h | 1 + 6 files changed, 52 insertions(+), 6 deletions(-) -- Peter Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html